Removal of beryllium-containing films deposited in JET from mirror surfaces by laser cleaning

摘要

A set of stainless steel (SS) and molybdenum mirror samples located in the divertor and at the outer mid-plane of the vessel were exposed in JET from 2005 to 2007. A selection of these mirror samples with well adhered deposits (i.e. not flaking) of up to a few hundred nanometers in thickness and with Be/C ratios ranging from 0 to ～1 have been cleaned using a laser system developed at CEA, Saclay. Following laser cleaning the recovered reflectivity was generally better in the infrared than the visible spectrum, with recovery of up to 90% of the initial reflectivity being obtained at 1600 nm for both Mo and SS mirrors falling as low as 20-30% of initial reflectivity at a wavelength of 400 nm for some SS mirrors, rising to ～80% for Mo mirrors. Some deposit remained on the mirrors after the cleaning trials.