Electrodeposited ZnS Precursor Layer with Improved Electrooptical Properties for Efficient Cu2ZnSnS4 Thin-Film Solar Cells

摘要

Zinc sulfide (ZnS) thin films were prepared on indium tin oxide-coated glass by electrodeposition using aqueous zinc sulfate, thiourea, and ammonia solutions at 80A degrees C. The effects of sulfurization at temperatures of 350A degrees C, 400A degrees C, 450A degrees C, and 500A degrees C on the morphological, structural, optical, and electrical properties of the ZnS thin films were investigated. X-ray diffraction analysis showed that the ZnS thin films exhibited cubic zincblende structure with preferred (111) orientation. The film crystallization improved with increasing annealing temperature. Field-emission scanning electron microscopy images showed that the film morphology became more compact and uniform with increasing annealing temperature. The percentage of sulfur in the ZnS thin films increased after sulfurization until a stoichiometric S/Zn ratio was achieved at 500A degrees C. The annealed films showed good adhesion to the glass substrates, with moderate transmittance (85%) in the visible region. Based on absorption measurements, the direct bandgap increased from 3.71 eV to 3.79 eV with annealing temperature, which is attributed to the change of the buffer material composition and suitable crystal surface properties for effective p-n junction formation. The ZnS thin films were used as a buffer layer in thin-film solar cells with the structure of soda-lime glass/Mo/Cu2ZnSnS4/ZnS/ZnO/Al grid. The best solar cell efficiency was 1.86%.