首页> 外文期刊>Chinese science bulletin >Experimental study on multi-point autoignition characteristics and influence factors of diesel spray in a controllable active thermo-atmosphere
【24h】

Experimental study on multi-point autoignition characteristics and influence factors of diesel spray in a controllable active thermo-atmosphere

机译:可控主动热气氛中柴油机喷雾多点自燃特性及影响因素的实验研究

获取原文
获取原文并翻译 | 示例
           

摘要

Auto-ignition characteristics of high-pressure diesel spray in the controllable active thermo-atmosphere (CATA) were studied with a high-speed camera video system. Multi-point autoignition phenomenon of diesel spray in the CATA was observed and the influence factors of the autoignition were analyzed. The stabilization mechanisms of the spray flame in different coflow temperatures were also discussed. The stabilization of the flames was controlled by different factors: autoignition phenomenon in low coflow temperature and flame spread in high coflow temperature. The test results also show that the autoignition delay depends strongly on the coflow temperature and has nonlinear relationship with the temperature. Autoignition delay decreases by almost 10 ms from 16.9 to 7.1 ms when the coflow temperature increases from 996 to 1048 K and only 4 ms from 1048 to 1101 K. The injection parameters in terms of nozzle diameter, injection pressure and pump speed, have some effects on autoignition delay while these effects depend on the coflow temperature. The significant effect lies in low coflow temperature. The injection parameters influence the autoignition delay because it can shorten the physical delay by improving the spray quality and enlarging the spray angle or penetration rate to improve mixture quality.
机译:利用高速摄像机视频系统研究了可控主动热气氛(CATA)中高压柴油机喷雾的自燃特性。观察了CATA柴油机喷雾的多点自燃现象,分析了自燃的影响因素。还讨论了不同共流温度下喷雾火焰的稳定机理。火焰的稳定受到不同因素的控制:低同流温度下的自燃现象和高同流温度下的火焰扩散。测试结果还表明,自燃延迟在很大程度上取决于同流温度,并且与温度呈非线性关系。当同流温度从996升高到1048 K时,自燃延迟从16.9降低到7.1 ms几乎减少了10毫秒,而从1048到1101 K则只有4毫秒。喷嘴直径,注射压力和泵速方面的注射参数会有一定影响这些问题取决于同流温度。显着的效果在于较低的同流温度。喷射参数会影响自燃延迟,因为它可以通过改善喷涂质量并扩大喷涂角度或穿透率来改善混合物质量,从而缩短物理延迟。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号