Behavior of hydrodynamic lubrication films under non-steady state speeds

摘要

The transient characteristics of hydrodynamic lubricating film thickness and its change rate (or squeeze effect) under start-up/shut-down and acceleration/deceleration motions were analyzed using a newly developed optical slider-on-disc test system. For a start-up/shut-down process, the change rate of film thickness attains its maximum when the final steady speed is achieved. In accelerating/decelerating motions, it was shown that the film thickness varies with some time lag to the speed, but its change rate is in phase with the speed. Influences of loads, frequencies and the maximum speed on the time lag were investigated. The film thickness hysteresis during acceleration-deceleration was explained by the measured squeeze effect. Numerical calculation was also carried out and the results quantitatively agree with the experiments. (C) 2015 Elsevier Ltd. All rights reserved.