首页>外文期刊>Proceedings of the Institution of Mechanical Engineers, Part J. Journal of engineering tribology

Proceedings of the Institution of Mechanical Engineers, Part J. Journal of engineering tribology

Proceedings of the Institution of Mechanical Engineers, Part J. Journal of engineering tribology

中文名称：机械工程师学会学报，J部分。工程摩擦学学报

ISSN：1350-6501
出版周期：-

发文量：1518

期刊论文

年度选择

2021
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
2020
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2019
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2018
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2017
- 第1期
- 第2期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2016
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2015
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2014
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2013
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2012
- 第1期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2011
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2010
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
- 第10期
- 第11期
- 第12期
2009
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第j1期
- 第j2期
2008
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第j1期
- 第j2期
- 第j3期
- 第j4期
- 第j5期
- 第j6期
- 第j7期
- 第j8期
2007
- 第j1期
- 第j2期
- 第j3期
- 第j4期
- 第j5期
- 第j6期
- 第j7期
- 第j8期
2006
- 第j1期
- 第j2期
- 第j3期
- 第j4期
- 第j5期
- 第j6期
- 第j7期
- 第j8期
2005
- 第j2期
- 第j3期
- 第j4期
- 第j5期
- 第j6期
2004
- 第j1期
- 第j2期
- 第j3期
- 第j4期
- 第j5期
- 第j6期
2003
- 第j2期
- 第j3期
- 第j4期
- 第j5期
- 第j6期
2002
- 第j1期
- 第j2期
- 第j5期
- 第j6期
2001
- 第j1期
- 第j2期
- 第j3期
- 第j4期
- 第j5期
- 第j6期
2000
- 第j2期
- 第j3期
- 第j4期
- 第j5期
- 第j6期
1999
- 第j1期
- 第j2期
- 第j3期
- 第j4期
- 第j6期
1998
- 第j1期
- 第j2期
- 第j3期
- 第j4期
- 第j5期
- 第j6期
1997
- 第j1期
- 第j2期
- 第j3期
- 第j4期
1996
- 第j1期
- 第j2期
- 第j3期
- 第j4期
1995
- 第j1期
- 第j2期
- 第j3期
- 第j4期

更多>>

全选（0）

1.Investigation of tribological properties of magnesium alloys under dry sliding and lubrication condition

机译：干滑动和润滑条件下镁合金的摩擦学性能研究
- 作者：W Huang;Q Lin;X Zhang
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第1期
- magnesium alloy;
- tribological performance;
- dry sliding;
- lubrication;
- wear mechanism;
2.Impact elastohydrodynamics in point contacts

机译：点接触的冲击弹性流体力学
- 作者：M Kaneta;H Nishikawa;M Mizui;F Guo
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第1期
- elastohydrodynamic lubrication;
- squeeze effect;
- initial impact gap;
- loading speed;
- viscosity–pressure coefficient;
3.Development of an apparatus to determine high-temperature erosive wear up to 800 °C

机译：开发一种确定高达800°C的高温侵蚀磨损的设备
- 作者：J Vicenzi;C M Marques;C P Bergmann
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第1期
- erosion wear;
- high temperature;
- erosive wear equipment;
- solid particle erosion;
4.Friction and wear performance of an aluminium alloy in artificial seawater

机译：铝合金在人造海水中的摩擦磨损性能
- 作者：H-Y Ding;G-H Zhou;D Hui
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第1期
- corrosion wear;
- aluminium;
- synergism;
- seawater;
5.Wear characterization by an on-line ferrograph image

机译：通过在线铁谱仪图像表征磨损
- 作者：T H Wu;J Q Wang;J Y Wu;Y B Xie;J H Mao
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第1期
- wear characterization;
- condition monitoring;
- ferrography;
- image processing;
6.Fuzzy modelling and output feedback stabilization of an active magnetic bearing with delayed feedback

机译：时滞主动电磁轴承的模糊建模与输出反馈镇定。
- 作者：K Zheng;H Liu;L Yu
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第2期
- magnetic bearing;
- time delay;
- linear matrix inequality;
7.Thermal elastohydrodynamic lubrication analysis of tilting pad thrust bearings

机译：斜垫推力轴承的热弹性流体动力润滑分析
- 作者：X Jiang;J Wang;J Fang
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第2期
- thrust bearing;
- tilting pad;
- thermal elastohydrodynamic lubrication;
- pressure;
- film thickness;
- temperature;
8.Subscale tribofilm tribological modelling in boundary lubrication using multivariate analysis

机译：多元润滑法在边界润滑中的小尺度摩擦膜摩擦学建模
- 作者：R Roshan;M Priest;A Neville;A Morina;X Xia;C P Warrens;M J Payne
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第2期
- boundary lubrication;
- tribofilm;
- friction;
- wear;
- principal component analysis;
9.Effects of reinforcement volume fraction on the abrasive wear behaviour of Al–MgO composites produced by the vacuum infiltration method

机译：增强体积分数对真空渗透法制备的Al-MgO复合材料磨粒磨损行为的影响
- 作者：M Pul;G Kü?üktürk;R ?alin;U ?eker
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第2期
- infiltration;
- composite;
- MgO;
- abrasive wear;
10.Adhesive wear of thermoplastic composite based on kenaf fibres

机译：基于洋麻纤维的热塑性复合材料的粘着磨损
- 作者：S Narish;B F Yousif;D Rilling
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第2期
- adhesive wear;
- natural fibre;
- thermoplastic composites;
11.Numerical analysis of partial slip contact under a tangential force and a twisting moment

机译：切向力和扭转力矩作用下部分滑动接触的数值分析
- 作者：Z-J Wang;F-M Meng;K Xiao;J-X Wang;W-Z Wang
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第2期
- contact mechanics;
- partial slip;
- coupled loads;
- semi-analytical method;
12.Tribological behaviour of plasma-spray TiO₂ coating against metallic bearing materials under oil lubrication

机译：等离子喷涂TiO _{2 涂层在油润滑下对金属轴承材料的摩擦学行为}
- 作者：S Y Jiang;H J Xie
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第3期
- TiOsub2/sub coating;
- bearing materials;
- lubricant additive;
- friction;
- wear;
13.Air journal bearing utilizing near-field acoustic levitation stationary shaft case

机译：利用近场声悬浮固定轴箱的空气轴颈轴承
- 作者：T A Stolarski;Y Xue;S Yoshimoto
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第3期
- journal bearing;
- air lubricated;
- self-lifting;
- acoustic pressure;
14.Friction and wear behaviour of laser-textured surfaces under the lubrication of polyurea grease containing various additives

机译：含有多种添加剂的聚脲润滑脂在激光纹理表面的摩擦和磨损行为
- 作者：ZeYun Wang;YanQiu Xia;ZhiLu Liu;TianChang Hu
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第3期
- polyurea grease;
- laser-textured surfaces;
- friction;
- wear;
15.Magneto-hydrodynamic couplestress squeeze film lubrication of circular stepped plates

机译：圆形台阶板的磁流体耦合应力挤压膜润滑
- 作者：N B Naduvinamani;S T Fathima;B N Hanumagowda
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第3期
- squeeze film;
- circular stepped plates;
- couplestress fluid;
- magnetic field;
16.An experimental approach towards an equation for the prediction of piercing mandrels wear

机译：预测穿刺芯轴磨损的方程的实验方法
- 作者：G E Carr;R H Conde;M D Chapetti
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第3期
- high temperature;
- direct piercing;
- self-organizing maps;
- tribology;
- seamless tubes;
17.Microstructural features, wear, and corrosion behaviour of spray cast Al–Si alloys

机译：喷射铸造Al-Si合金的显微组织特征，磨损和腐蚀行为
- 作者：K Raju;A P Harsha;S N Ojha
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2011年第3期
- spray casting;
- chill casting;
- microstructure;
- wear rate;
- corrosion rate;
- alloy;
18.Experimental study of tilting pad journal bearing–rotor system with acoustic emission technique

机译：倾斜垫轴颈轴承-转子系统声发射技术的实验研究
- 作者：G-H Zhang;Z-S Liu;X-W Wang;H-J Xu
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第1期
- tilting pad bearing–rotor system;
- pressure distribution;
- acoustic emission;
19.Eighty years of research on hydraulic reciprocating seals: review of tribological studies and related topics since the 1930s

机译：液压往复式密封件研究八十年：自1930年代以来的摩擦学研究和相关主题的回顾
- 作者：G K Nikas
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第1期
- seal;
- reciprocating;
- elastomer;
- rubber;
- polymer;
- tribology;
- review;
20.The performance of a porous ceramic hydrostatic journal bearing

机译：多孔陶瓷静压滑动轴承的性能
- 作者：I S Durazo-Cardenas;J Corbett;D J Stephenson
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第1期
- porous ceramic;
- starch consolidation;
- hydrostatic journal bearing;
21.Influence of the bushing geometry on the thermohydrodynamic performance of a misaligned journal bearing

机译：衬套几何形状对未对准的轴颈轴承的热流体力学性能的影响
- 作者：A Mihailidis;V Bakolas;K Panagiotidis;K Poulios;C Sachanas
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第1期
- journal bearing;
- thermo-hydrodynamic lubrication;
- misalignment;
- multi-grid method;
22.Surface defects effects on bearing dynamics

机译：表面缺陷对轴承动力学的影响
- 作者：A Ashtekar;F Sadeghi;L-E Stacke
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第1期
- bearing dynamics;
- dents;
- bumps;
- spalls;
- debris;
23.Study of mechanical and metallurgical characteristics of flame sprayed NiCrBSi as-sprayed and continuous compacted coating

机译：火焰喷涂NiCrBSi喷涂和连续压实涂层的力学和冶金特性研究
- 作者：S P Sharma;D K Dwivedi;P K Jain
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第1期
- flame spraying;
- Ni base alloy;
- compaction;
- porosity;
- hardness;
- microstructure;
24.Comparative evaluation of dry sliding wear behaviour of plasma transferred arc hardfaced surfaces by the pin-on-roller method

机译：销钉滚涂法比较评估等离子转移弧硬表面的干滑磨损行为
- 作者：C S Ramachandran;V Balasubramanian;R Varahamoorthy
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第1期
- dry sliding wear;
- plasma transferred arc hardfacing;
- carbon steel;
- stainless steel;
- stellite;
- colmonoy;
- analysis of variance;
- design of experiments;
25.Editorials

机译：社论
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第1期
26.Tribological behaviour of two ash-less and phosphorous-free anti-wear additives and their synergetic effect with zinc dialkyldithiophosphates in mineral oil

机译：两种无灰无磷抗磨添加剂的摩擦学行为及其与二烷基二硫代磷酸锌在矿物油中的协同作用
- 作者：P Liang;T Ren;J Li;H Ma;H Wu
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第1期
- heterocyclic compounds;
- zinc dialkyldithiophosphates;
- load carrying;
- anti-wear;
- synergism;
- X-ray photoelectron spectroscope;
27.Film-forming properties and traction of non- functionalized polyalkylmethacrylate solutions under transition from elastohydrodynamic lubrication to thin-film lubrication

机译：非功能化聚甲基丙烯酸烷基酯溶液从弹性流体动力润滑到薄膜润滑的转变过程中的成膜性能和牵引力
- 作者：M Muraki;K Nakamura
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第1期
28.Tribological behaviour of lubricated surfaces under application of electric current

机译：施加电流下润滑表面的摩擦学行为
- 作者：M M Mahmoud;M K Mohamed;W Y Ali
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第1期
- friction coefficient;
- wear;
- copper;
- aluminium;
- polyethylene;
- polyamide;
- polymethylmethacrylate;
- oil lubrication;
- electric current;
29.On the utilization of pin-on-disc simulative tests for the calibration of friction in metal cutting

机译：关于盘销模拟测试在金属切削摩擦力校准中的应用
- 作者：V A M Cristino;P A R Rosa;P A F Martins
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第2期
- pin-on-disc;
- friction coefficient;
- metal cutting;
- surface texture;
- roughness;
30.Mechanical properties and wear behaviours of CrN/TaN nanoscale multilayered thin films

机译：CrN / TaN纳米多层薄膜的力学性能和磨损行为
- 作者：Y J Kim;T J Byun;J G Han
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第2期
- CrN/TaN;
- nanoscale multilayered;
- wear behaviour;
31.Airborne wear particles from passenger car disc brakes: a comparison of measurements from field tests, a disc brake assembly test stand, and a pin-on-disc machine

机译：乘用车盘式制动器的空气传播磨损颗粒：来自现场测试，盘式制动器总成测试台和销钉盘机的测量结果比较
- 作者：J Wahlstr?m;A S?derberg;L Olander;U Olofsson;A Jansson
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第2期
- wear;
- airborne particles;
- disc brake;
- test stand;
- field test;
32.Effect of apparent area, load, and filler content on sliding friction characteristics of polymer nanocomposites

机译：表观面积，载荷和填料含量对聚合物纳米复合材料滑动摩擦特性的影响
- 作者：S Kirupasankar;R Gnanamoorthy;R Velmurugan
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第2期
- polymer;
- nanocomposite;
- sliding friction;
- apparent area of contact;
33.Monitoring of dry cutting and applications of cutting fluid

机译：监控干切削和切削液的应用
- 作者：S Tangjitsitcharoen
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第2期
- turning;
- cutting force;
- dry cutting;
- wet cutting;
- mist cutting;
- tool wear;
- surface roughness;
34.Modelling and analysis of erosion wear behaviour of hybrid composites using Taguchi experimental design

机译：基于Taguchi实验设计的混杂复合材料腐蚀磨损行为的建模与分析。
- 作者：S S Mahapatra
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第2期
- erosion wear;
- particulate fillers;
- Taguchi design;
- genetic algorithm;
- analysis of variance;
35.On the squeeze flow between two rigid spheres with partially wetted surfaces

机译：在两个具有部分润湿表面的刚性球之间的挤压流动中
- 作者：W-L Li
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第2期
- non-Newtonian fluid;
- Navier slip;
- power law model;
36.A method to monitor non-ferrous debris in ferrographic analysis

机译：铁素体分析中有色金属碎片的监测方法
- 作者：T-G Liu;S-J Liu;Z-Y Yang
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第2期
- ferrography;
- non-ferrous debris;
- magnetic fluid;
- magnetization;
37.Effect of bearing number on non-linear dynamic behaviour of aerodynamic non-circular journal bearing systems

机译：轴承数量对气动非圆形轴颈轴承系统非线性动力学行为的影响
- 作者：R Rashidi;A Karami Mohammadi;F Bakhtiari-Nejad
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第2期
- aerodynamic;
- non-circular bearing;
- bearing number;
- poincare map;
- bifurcation;
38.The potential of plasma electrolytic oxidized eutectic aluminium–silicon alloy as a cylinder wall surface for lightweight engine blocks

机译：等离子电解氧化共晶铝硅合金作为轻质发动机缸体气缸壁表面的潜力
- 作者：K Mistry;M Priest;S Shrestha
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第2期
- engine friction;
- wear;
- coatings;
- liner;
- piston rings;
- molybdenum disulphide;
- plasma electrolytic oxidation;
39.Wet adhesive wear characteristics of untreated oil palm fibre-reinforced polyester and treated oil palm fibre-reinforced polyester composites using the pin-on-disc and block-on-ring techniques

机译：使用针盘式和块环式技术的未处理油棕纤维增强聚酯和已处理油棕纤维增强聚酯复合材料的湿粘着磨损特性
- 作者：B F Yousif;N S M El-Tayeb
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第2期
- oil palm fibres;
- treatment;
- wear and friction;
- wet;
40.Effect of high-pressure hydrogen exposure on wear of polytetrafluoroethylene sliding against stainless steel

机译：高压氢气暴露对聚四氟乙烯在不锈钢上滑动的磨损的影响
- 作者：K Nakashima;A Yamaguchi;Y Kurono;Y Sawae;T Murakami;J Sugimura
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第3期
- hydrogen environment;
- exposure to hydrogen gas;
- polytetrafluoroethylene;
- 316L stainless steel;
- sealing material;
41.Anharmonic variations in elastohydrodynamic film thickness resulting from harmonically varying entrainment velocity

机译：夹带速度的谐波变化导致弹性流体动力膜厚度的非谐变化
- 作者：P Kumar;M M Khonsari;S Bair
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第3期
42.On the squeeze film lubrication of rough short porous partial journal bearings with micropolar fluids

机译：含微极性流体的粗糙短孔局部轴颈轴承的挤压膜润滑
- 作者：N B Naduvinamani;S Santosh;A Siddanagouda
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第3期
- porous;
- partial journal bearings;
- squeeze films;
- micropolar fluids;
- surface roughness;
43.Effect of surface temperature rise on friction characteristics for sliding speed under unlubricated condition

机译：表面温度升高对非润滑条件下滑动速度摩擦特性的影响
- 作者：T Nakahara;S Momozono;A O-rui
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第3期
- friction coefficient;
- sliding velocity;
- frictional heating;
- temperature softening;
- effective hardness;
- rough surface contact;
44.Enhancement of journal bearings characteristics using novel elliptical grooves

机译：使用新型椭圆形凹槽增强轴颈轴承特性
- 作者：R-H Yen;C-Y Chen
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第3期
- elliptical groove;
- spectral element method;
- curved geometry;
- journal bearings;
45.The effect of the addition of graphite on tribological properties of glass fibre-reinforced polyimide composites

机译：添加石墨对玻璃纤维增强聚酰亚胺复合材料的摩擦学性能的影响
- 作者：J Li
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第3期
- glass fibre;
- polymeric composites;
- solid lubricants;
- friction and wear;
46.Whole crankshaft beam-element finite-element method for calculating crankshaft deformation and bearing load of an engine

机译：计算发动机曲轴变形和轴承载荷的整个曲轴梁单元有限元方法
- 作者：J Sun;J Wang;C Gui
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第3期
- beam element;
- deformation;
- crankshaft;
- load;
- bearing;
- engine;
47.The influence of natural frequency of the experimental set-up on the friction coefficient of copper

机译：实验装置的固有频率对铜摩擦系数的影响
- 作者：M A Chowdhury;S Md I Karim;M L Ali
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第3期
- friction coefficient;
- natural frequency;
- dead load;
- copper;
48.Effects of recess shapes on pneumatic hammering in aerostatic bearings

机译：凹槽形状对空气静压轴承中气动锤击的影响
- 作者：Y X Ye;X D Chen;Y T Hu;X Luo
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第3期
- aerostatic bearings;
- pneumatic hammering;
- recess shapes;
- experiment;
49.On the tribo-cryogenic characteristics of titanium alloys

机译：钛合金的摩擦低温特性
- 作者：N S M El-Tayeb;T C Yap;P V Brevern
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第4期
- friction coefficient;
- wear volume;
- titanium alloys;
- cryogenic sliding;
- response surface methodology;
50.A mixed lubrication model incorporating measured surface topography. Part 1: theory of flow factors

机译：包含测量表面形貌的混合润滑模型。第1部分：流量因数理论
- 作者：F Sahlin;R Larsson;A Almqvist;P M Lugt;P Marklund
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第4期
- mixed lubrication;
- homogenization;
- surface roughness;
51.Influence of pad and runner mechanical deformations on the performance of a hydrodynamic fixed geometry thrust bearing

机译：瓦块和流道的机械变形对流体动力固定几何推力轴承性能的影响
- 作者：S A Ahmed;M Fillon;P Maspeyrot
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第4期
- hydrodynamic lubrication;
- fixed pad thrust bearings;
- thermal effects;
- mechanical displacements;
52.Evaluation of lubrication conditions in gear contacts using contact resistance and bulk temperature measurements

机译：使用接触电阻和体温测量值评估齿轮接触中的润滑条件
- 作者：J Kleemola;A Lehtovaara
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第4期
- gear;
- lubrication condition;
- contact resistance;
- bulk temperature;
- polished surfaces;
53.Rolling contact fatigue and wear fundamentals for rolling bearing diagnostics – state of the art

机译：滚动轴承诊断的滚动接触疲劳和磨损基本原理–最新技术
- 作者：J Halme;P Andersson
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第4期
- rolling bearings;
- wear;
- rolling contact fatigue;
- condition monitoring;
- diagnostics;
54.A mixed lubrication model incorporating measured surface topography. Part 2: roughness treatment, model validation, and simulation

机译：包含测量表面形貌的混合润滑模型。第2部分：粗糙度处理，模型验证和仿真
- 作者：F Sahlin;R Larsson;P Marklund;A Almqvist;P M Lugt
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第4期
- mixed lubrication;
- homogenization;
- surface roughness;
55.Analysis of thermal effects in capillary compensated hole-entry hybrid journal bearings lubricated with a non-Newtonian lubricant

机译：非牛顿润滑剂润滑的毛细管补偿孔进入混合轴颈轴承的热效应分析
- 作者：H C Garg;V Kumar
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第4期
- capillary restrictor;
- journal bearing;
- non-Newtonian lubricant;
- hybrid;
- thermal effects;
56.Effect of friction force between piston rings and liner: a parametric study of speed, load, temperature, piston-ring curvature, and high-temperature, high-shear viscosity

机译：活塞环和衬套之间的摩擦力的影响：速度，负载，温度，活塞环曲率以及高温高剪切粘度的参数研究
- 作者：P S Dellis
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第5期
- piston ring;
- mixed lubrication;
- friction;
- HTHS viscosity;
57.Adhesive contact of curved surfaces

机译：曲面的胶粘接触
- 作者：P Sahoo;A Mitra;K Saha
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第5期
- elastic–plastic;
- adhesion;
- roughness;
- curved surfaces;
58.Influence of particle size, applied load, and fibre orientation on 3B-A wear and frictional behaviour of epoxy composite based on kenaf fibres

机译：粒度，外加载荷和纤维取向对基于洋麻纤维的环氧复合材料3B-A磨损和摩擦性能的影响
- 作者：C W Chin;F Yousif
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第5期
- kenaf fibres;
- epoxy composite;
- high stress;
- three-body abrasion;
- particle size;
- orientation;
59.On the state and severity of frictional sliding contacts between nominally flat metallic surfaces

机译：关于名义上平坦的金属表面之间的摩擦滑动接触的状态和严重性
- 作者：L Chang;H Zhang
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第5期
- frictional contact;
- interfacial shear stress;
- junction growth;
- asperity;
- plasticity index;
- coefficient of friction;
60.Sliding wear characterization of microwave-glazed plasma-sprayed ceramic composites

机译：微波釉等离子喷涂陶瓷复合材料的滑动磨损特性
- 作者：A K Sharma;R Krishnamurthy
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第5期
- microwave glazing;
- plasma spraying;
- ceramic composite;
- sliding wear;
- fractography;
- elemental transfer;
- acoustic emission;
61.A state-of-the-art review on the effects of particulate contamination and related topics in machine-element contacts

机译：有关颗粒物污染的影响以及有关机械元件触点的相关主题的最新研究
- 作者：G K Nikas
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第5期
- debris;
- particle;
- contamination;
- lubricant;
- wear;
62.Effects of load and sliding velocity on abrasive wear of Lantana camara fibre-reinforced polymer matrix composite

机译：载荷和滑动速度对马tana丹camara纤维增强聚合物基复合材料磨粒磨损的影响
- 作者：C Deo;S K Acharya
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第5期
- Lantana camara fibre;
- weight fraction;
- pin-on-disc machine;
- abrasive wear;
- scanning electron microscope;
63.A static friction model for the contact of fractal surfaces

机译：分形表面接触的静摩擦模型
- 作者：J-M You;T-N Chen
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第5期
- fractal;
- static friction;
- elastic–plastic;
- asperity;
64.A comparative study of ultrasonic direct contact, immersion, and layer resonance methods for assessment of enamel thickness in teeth

机译：超声直接接触，浸入和层共振方法评估牙齿釉质厚度的比较研究
- 作者：R S Dwyer-Joyce;M A Goodman;R Lewis
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第6期
- enamel thickness;
- measurement;
- ultrasound;
65.Tooth cleaning and tooth wear: a review

机译：牙齿清洁和牙齿磨损：评论
- 作者：A T Ashcroft;A Joiner
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第6期
- enamel;
- dentine;
- abrasion;
- erosion;
- attrition;
- abfraction;
- cleaning;
- wear;
- tooth;
- toothpaste;
- toothbrush;
- dentifrice;
66.Nanomechanical properties and microtribological behaviours of human tooth enamel

机译：人牙釉质的纳米力学性能和微摩擦学行为
- 作者：J Zheng;Y Huang;L M Qian;Z R Zhou
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第6期
- human tooth enamel;
- nanomechanical properties;
- microtribological behaviour;
- nanoindentation;
- nanoscratch;
67.Guest Editorial

机译：客座社论
- 作者：Professor;Professor
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第6期
68.Wear mechanisms in the mouth

机译：口腔磨损机制
- 作者：L H Mair;P Padipatvuthikul
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第6期
- wear in the mouth;
- toothwear;
- oral tribology;
69.New insights into tooth wear based on in vitro studies

机译：基于体外研究的牙齿磨损的新见解
- 作者：L C Richards;J A Kaidonis;G C Townsend
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第6期
- tooth surface loss;
- experimental studies;
- enamel;
- dentine;
- dental materials;
70.A comparative study of tribological behaviour of dental composites and tooth enamel: an energy approach

机译：牙科复合材料和牙釉质的摩擦学性能比较研究：一种能量方法
- 作者：E Sajewicz
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第6期
- tooth enamel;
- dental composite;
- wear resistance;
- friction energy;
71.An experimental investigation into dental wear: tooth–tooth contact

机译：牙齿磨损的实验研究：牙齿接触
- 作者：M A Masen;A vant Spijker;C M Kreulen
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第6期
- tooth wear;
- in vitro;
- tribology;
- attrition;
- enamel–enamel contact;
- validation;
72.Nanoscratch resistance of human tooth enamel treated by Nd:YAG laser irradiation

机译：Nd：YAG激光辐照处理人牙釉质的耐划痕性
- 作者：S Gao;S Huang;L Qian;H Yu
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第6期
- Nd:YAG laser;
- nano-scratch;
- tooth enamel;
- friction behaviour;
73.A new fluid film force model of elliptical bearing: modelling and case studies

机译：椭圆轴承的新型流体膜力模型：建模与案例研究
- 作者：J-L Wang;D Q Cao;W-H Huang
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第7期
- fluid film force;
- elliptical bearing;
- non-linear dynamics;
- rotor–bearing system;
74.Three-dimensional numerical analysis of hydrodynamic characteristics of axial groove journal bearings running with ferrofluids under magnetic field

机译：磁场作用下含铁磁流体的轴向槽轴颈轴承水动力特性的三维数值分析
- 作者：Y Sheikh Nejad;S A Gandjalikhan Nassab
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第7期
- ferrofluid;
- journal bearing;
- computational fluid dynamics;
- hydrodynamic characteristic;
- laminar flow;
75.Lubricant ageing effects on the friction characteristics of wet clutches

机译：润滑剂老化对湿式离合器摩擦特性的影响
- 作者：K Berglund;P Marklund;R Larsson
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第7期
- wet clutch;
- lubricant degradation;
- oxidation;
- ATF;
- stick–slip;
- shudder;
- lubricant ageing;
- sintered bronze;
- ruler;
- remaining useful life;
76.On the effects of sliding velocity and operating pressure differential in rotary O-ring seals

机译：关于旋转O形密封圈中滑动速度和工作压力差的影响
- 作者：K Lingerkar;M M Khonsari
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第7期
- O-ring;
- nitrile butadiene rubber;
- O-ring interface temperatures;
- O-ring friction power;
- friction torque;
77.Micro-geometry effects on the sliding friction transition in elastohydrodynamic lubrication

机译：弹性流体动力润滑中的微观几何形状对滑动摩擦过渡的影响
- 作者：G E Morales-Espejel;A W Wemekamp;A Félix-Qui?onez
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第7期
- Stribeck curves;
- sliding friction;
- roughness;
- EHL;
78.Fourier transform infrared and ultraviolet-visible investigation of swift heavy 100 MeV Ag-ion- and 75 MeV oxygen-ion-irradiated polyvinylidene fluoride thin films

机译：快速对重100 MeV Ag离子和75 MeV氧离子辐照的聚偏二氟乙烯薄膜进行傅里叶变换红外和紫外可见光研究
- 作者：D S Rana;D K Chaturvedi;J K Quamara
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第7期
- polyvinylidene fluoride;
- Fourier transform infrared;
- swift heavy ion;
- ultraviolet-visible spectroscopy;
- optical band gap;
79.Experimental studies on the dynamic characteristics of rolling element bearings

机译：滚动轴承动态特性的实验研究
- 作者：N J Ali;J M García
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第7期
- bearings;
- dynamic;
- joint;
- preload;
80.Characterization of Ti-CN-a:C films prepared by pulsed-dc bias sputtering

机译：脉冲直流偏压溅射制备Ti-CN-a：C薄膜的表征
- 作者：F Bulbul;İ Efeoglu
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第7期
- diamond-like carbon;
- CN;
- pulsed-dc;
- tribology;
- adhesion;
81.Impact of a rigid sphere on a highly compressible porous layer imbibed with a Newtonian liquid

机译：刚性球体对牛顿液体吸收的高度可压缩多孔层的影响
- 作者：M D Pascovici;C S Popescu;V G Marian
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
- hydrodynamic lubrication;
- porous material;
- highly compressible material;
- Newtonian liquid;
- spherical contact;
82.Tribological properties of PA6-filled maleic anhydride-grafted polypropylene composite

机译：PA6填充马来酸酐接枝聚丙烯复合材料的摩擦学性能
- 作者：J Li
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
- compatibilizer;
- friction and wear;
- wear mechanisms;
83.Hydrodynamic force and moment in pure rolling lubricated contacts. Part 1: line contacts

机译：纯滚动润滑触点中的流体动力和力矩。第1部分：线路触点
- 作者：N Biboulet;L Houpert
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
84.Effects of non-Newtonian micropolar fluids on the squeeze-film characteristics between a sphere and a plate surface

机译：非牛顿微极性流体对球与板表面之间挤压膜特性的影响
- 作者：J-R Lin;L-J Liang;L-M Chu
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
85.Guest Editorial

机译：客座社论
- 作者：Michel Fillon;Andy Olver
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
86.Model-based virtual surface texturing for concentrated conformal-contact lubrication

机译：基于模型的虚拟表面纹理化，用于集中保形接触润滑
- 作者：D Zhu;T Nanbu;N Ren;Y Yasuda;Q J Wang
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
87.Theoretical analysis of an infinitely wide rigid cylinder rotating over a grooved surface in hydrodynamic conditions

机译：水动力条件下在凹槽表面上旋转的无限宽刚性圆柱体的理论分析
- 作者：V G Marian;A Predescu;M D Pascovici
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
- hydrodynamic lubrication;
- non-conformal surfaces;
- rotating cylinder;
- grooved surface;
88.Wear prediction of clearance joint by integrating multi-body kinematics with finite-element method

机译：多体运动学与有限元方法相结合的间隙关节磨损预测
- 作者：Y Su;W Chen;Y Tong;Y Xie
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
- wear model;
- multi-body dynamics;
- finite-element method;
- joint clearance;
89.Effects of surface topography on lubrication film formation within elastohydrodynamic and mixed lubricated non-conformal contacts

机译：表面形貌对弹性流体动力学和混合润滑非保形接触内润滑膜形成的影响
- 作者：I Krupka;M Hartl;P Svoboda
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
- surface texturing;
- elastohydrodynamic lubrication;
- mixed lubrication;
- start-up;
- starvation;
- reversal motion;
- film thickness;
90.Surface analysis of the elastomer in lip seals run against shafts manufactured with micro-cavity patterns

机译：唇形密封件中的弹性体的表面分析与微腔型式制造的轴抵靠
- 作者：V Kanakasabai;K H Warren;L S Stephens
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
- lip seal;
- surface characterization;
- wear;
91.Lubrication mechanisms with laser-surface-textured surfaces in elastohydrodynamic regime

机译：弹性流体动力学状态下具有激光表面纹理化表面的润滑机理
- 作者：L Mourier;D Mazuyer;F-P Ninove;A A Lubrecht
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
- elastohydrodynamic (EHD) lubrication;
- laser surface texturing;
- lubricant film thickness;
- numerical simulation;
- dimple;
92.Inertia effects in textured hydrodynamic contacts

机译：质感水动力接触中的惯性效应
- 作者：S Cupillard;S Glavatskih;M J Cervantes
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
- hydrodynamic contacts;
- textured surface;
- inertia effects;
- fore-region;
93.Numerical solutions for the elastic deformation of spherical bearing surfaces of metal-on-metalhip joint implants

机译：金属对金属髋关节植入物球形支承面弹性变形的数值解
- 作者：L M Gao;Q E Meng;F C Wang;P R Yang;Z M Jin
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
94.Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approach

机译：使用节省质量的数值方法优化流体动力润滑触点的表面质地
- 作者：M B Dobrica;M Fillon;M D Pascovici;T Cicone
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
- hydrodynamic lubrication;
- surface texture;
- cavitation;
- optimization;
95.Microstructure and tribological properties of composite FeCrBSi/FeS layer

机译：FeCrBSi / FeS复合层的组织和摩擦学性能
- 作者：J-J Kang;C-B Wang;H-D Wang;B-S Xu;J-J Liu;G-L Li
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第8期
96.Effect of lubricant additives in rolling contact fatigue

机译：润滑油添加剂在滚动接触疲劳中的作用
- 作者：M Meheux;C Minfray;F Ville;T L Mogne;A A Lubrecht;J M Martin;H P Lieurade;G Thoquenne
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第9期
97.Investigations on the power losses and thermal behaviour of rolling element bearings

机译：滚动轴承的功率损耗和热性能研究
- 作者：F Pouly;C Changenet;F Ville;P Velex;B Damiens
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第9期
- rolling element bearings;
- bearing thermal behaviour;
- lubricant performance/effects;
98.Guideline of design on coated films with a gradient layer under elastohydrodynamic lubrication conditions

机译：弹性流体动力润滑条件下带有梯度层的涂膜设计指南
- 作者：T Fujino;K Iwamoto;K Tanaka;M Abe
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第9期
- optimum design;
- stress distribution;
- oil film thickness;
- coated film;
- interlayer;
- gradient layer;
- elastohydrodynamic lubrication;
- failure;
99.Development of a model capable of predicting the performance of piston ring–cylinder liner-like tribological interfaces

机译：能够预测活塞环-缸套状摩擦界面性能的模型的开发
- 作者：C L Felter;A V?lund;T Imran;P Klit
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第9期
- piston ring;
- combustion engine;
- test rig;
- simulation;
100.Elastohydrodynamic lubrication analysis of metal-on-metal hip implants with complex structures using the finite-element method

机译：有限元法对结构复杂的金属对金属髋关节植入物进行弹性流体动力润滑分析
- 作者：Q E Meng;F Liu;Z M Jin
- 期刊名称：《Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology》 | 2010年第9期

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有出版物经营许可证

客服微信
服务号