Effectiveness of Selected CHO Compounds as Antiwear Additives to White Mineral Oils

摘要

The objective of this article is to verify the effectiveness of CHO products (mixtures of esters) and their compositions with a lactam-type CHNO compound applied at the concentration ≤1 wt% as antiwear additives to white oils. The research was performed using a ball-on-disk tester and a special four-ball apparatus. The tested CHO and CHNO additives show very good antiwear properties under boundary lubrication conditions. They provide the highest wear reduction when they are introduced at 0.1 wt%. The wear reduction synergism for mixtures comprising 20 wt% of the CHNO compound and 80 wt% of the selected esters is not observed. Additionally, the limiting pressure of seizure, p{sub}s, was determined. It was found that p{sub}s is not improved by esters and the CHNO additive if they are added at 0.1 wt%; the positive influence of some mixtures comprising 20 wt% of the CHNO compound and 80 wt% of the chosen esters is revealed. It was also proved that the oil viscosity influences the tribological properties of applied additives under boundary lubrication and extreme pressure conditions.