首页>外文会议>International Conference on Industrial Engineering

International Conference on Industrial Engineering

召开年：2016
召开地：Tehran(IR)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Assessing the Impact of Center of End Radius Milling Cutter on the Components of Cutting Force at Volume Milling

机译：评估端半径铣刀中心对体积铣削切割力部件的影响
- 作者：V.V. Batuev;V.A. Batuev
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- milling;
- the geometric parameters of the cutting area;
- cutting force.;
2.Influence of Attached Body on the Frequency and Modes Free Vibrations Cylindrical Shells

机译：附着体对自由振动圆柱壳的影响
- 作者：S.V. Seregin;V.M. Kozin
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- own frequencies;
- forms;
- bending vibration;
- circular cylindrical shell;
- added rigid body;
- consentrated mass;
- the mode state.;
3.Mathematical Modeling of the Sensor Tilt Membrane Type

机译：传感器倾斜膜型的数学建模
- 作者：A.A. Tumakov;V.I. Grishchenko;A.V. Kozhukhova
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- sensor tilt;
- automatic system leveling machines;
- mathematical model.;
4.Features of Dynamic Damping in Linear Mechanical System with Additional External Excitation

机译：额外外部励磁线性机械系统动态阻尼的特点
- 作者：N.K. Kuznetsov;V.L. Lapshin;A.V. Eliseev
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- mechanical chain system;
- dynamic vibration damping;
- interpartial transfer function.;
5.Investigation of Traces of Interaction between Flap Wheel and Aluminum Alloy Plain Surface

机译：襟翼轮和铝合金平原表面相互作用的研究
- 作者：V. Koltsov;D. Starodubtseva
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- surface conditioning;
- flap wheel;
- contact patch;
- forces;
- metal removal;
- roughness;
6.Analysis of influence of mechanical boundary conditions on zero point shift of Coriolis flowmeter

机译：机械边界条件对科里奥利流量计零点叶片影响的影响分析
- 作者：A.A. Yaushev;P.A. Taranenko;V.A. Loginovskiy
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- Coriolis flowmeter;
- zero point shift;
- experimental modal analysis;
- external vibration;
- steady forced oscillations.;
7.Particularities of Pulse Laser Cutting of Thin Plate Titanium Blanks

机译：薄板钛坯脉冲激光切割的特征
- 作者：S.A. Kochergin;Yu.A. Morgunov;B.P. Saushkin
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- laser cutting;
- fiber laser;
- quality of laser cutting.;
8.Continuous Grinding of Teeth by Generating Cylindrical Planetary Transmission Gears

机译：通过产生圆柱形行星传动齿轮连续研磨牙齿
- 作者：A.S. Kalashnikov;Yu.A. Morgunov;P.A. Kalashnikov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- gear grinding;
- grinding wheel;
- high porosity;
- radial;
- axial and tangential movements of the feed;
- the cutting speed.;
9.Remaining Vehicles Useful Lifetime Estimation Based on Operation Conditions Measurement

机译：剩余的车辆基于操作条件测量有用的寿命估计
- 作者：V.A. Kalmakov;A.A. Andreev;A.S. Martyanov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- Remaining useful lifetime estimation.;
10.Energy-regenerative Shock Absorber Mathematical Model

机译：能量 - 再生减震器数学模型
- 作者：A.V. Kireev;N.M. Kozhemyaka;N.V. Grebennikov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- energy-regenerative shock absorber;
- ball screw;
- AC generator with permanent magnet excitation.;
11.Friction Units Durability Estimation Method Based on Friction Surfaces Limiting States Criteria System

机译：基于摩擦曲面限制状态标准系统的摩擦装置耐久性估算方法
- 作者：M.V. Zemin
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
12.Gear Clutch with Modified Tooth Profiles

机译：具有改性齿形轮廓的齿轮离合器
- 作者：S. Shevchenko;A. Mukhovaty;O. Krol
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
13.Perspective Schemes Equipment Ultra-deep Shafts

机译：透视方案设备超深轴
- 作者：F. Yagodkin;M. Pleshko;A. Prokopov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- vertical shaft;
- shaft sinking;
- mine hoist;
- lifting machine;
- performance.;
14.Energy-Efficient Trajectories Rotors Supported on Radial Fluid-Film Bearings

机译：节能轨迹转子支撑在径向流体膜轴承上
- 作者：S.V. Majorov;L.A. Savin;A.Y. Koltsov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- energy-efficient;
- rotor system;
- fluid-film bearing;
- rotordynamics;
- hydrodynamic lubrication theory.;
15.Thermal Drilling with Force-Feed Tool

机译：热钻有力饲料工具
- 作者：P.V. Shalamov;Ju.V. Kazantseva
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- thin sheet workpiece;
- punch;
- connection;
- micro hardness;
- transmission set;
- force-feed.;
16.Optimal power distribution between the wheels of a mobile vehicle under different soil conditions

机译：不同土壤条件下移动车辆车轮之间的最佳功率分布
- 作者：Pozin B.M.;Troyanovskaya I.P;Yusupov A.A.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
- control task;
- power distribution;
- wheels slipping;
- mobile wheeled vehicle;
- transmission;
17.Justification of an adaptive working body of a cable excavator

机译：有线电视挖掘机的自适应工作机构的理由
- 作者：Isakov V.S;Maksimov V.P.;Maksimov Y.V
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
- cable excavator;
- structural synthesis;
- the rotation mechanism of the bucket;
18.Simulation modeling of 'Smart Home' operations using the data on a man's position

机译：使用数据对男子位置的“智能家庭”操作模拟建模
- 作者：Fomin S.P.;Orlov A.A
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
- smart home;
- automation system;
- means;
- modeling;
- posture person;
- system mode;
- energy consumption;
19.The solution of the harmonic balance method of electrical devices natural-model tests inverse problem

机译：电气设备谐波平衡方法的解决方案自然模型测试逆问题
- 作者：Gorbatenko N.I.;Lankin M.V.;Lankin A.M.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
- weber-ampere characteristic;
- harmonic balance method;
- natural-model tests;
20.A method of resonant series-parallel identification

机译：一种谐振串联平行识别方法
- 作者：Tkachenko G.I.;Baklanov A.N.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
21.On dynamic temperature distributions in the molten bath of the magnesite ores

机译：菱形矿石熔融浴中动态温度分布的研究
- 作者：Igizianova N.A.;Igizianova A.Y.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
22.Non-motorized study of supercharging piston engine compressor parameters

机译：增压活塞发动机压缩机参数的非机动性研究
- 作者：Sharoglazov B.A.;Mashkov O.;Martynov A.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
- internal combustion engine;
- supercharging unit;
- compressor;
- motorless testing;
- modular data acquisition system;
- diffuser;
- vane diffuser;
23.Modeling the Turbine Rotor Journal Restoration Located on Cylindrical Surface of the Supporting Bearer

机译：建模位于支撑承载的圆柱形表面上的涡轮转子轴复恢复
- 作者：A.V. Shchurova
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
24.Procedure of Engineering Design of Fine Milling of Crooked Spatial Surfaces with a Stepped Allowance

机译：阶梯式津贴精细铣削空间表面的工程设计手术
- 作者：V.V. Batueva;V.I. Guzeev;V.A. Batuev
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
25.Influence of Abrasive Grain Geometrical Characteristics on the Grinding Quality

机译：磨粒几何特征对磨削质量的影响
- 作者：N.V.Baidakova;T.N. Orlova
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- abrasive;
- grinding;
- shape of grain;
- grinding tool.;
26.The Kinematics of the Swashplate Engine with two Rotating Pairs

机译：具有两个旋转对的斜纹板引擎的运动学
- 作者：Yu. Pogulyaev;O. Nikishin;A. Zheltov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- motion analysis;
- swash-plate engine;
- modeling and simulation.;
27.Investigation of Effect of Parameters of Electrochemical Processing with Scanning Electrode Tool on Material Removal Rate and Quality of Engineering Products Processing

机译：电化学加工参数对扫描电极工具对材料去除率和工程产品加工质量的研究
- 作者：V.V. Glebov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- electrochemical machining;
- mathematical modelling;
- tool electrode;
- material removal rate;
- surface roughness;
- electrochemical marking.;
28.Solid Modeling and Dynamic Analysis of Mechanisms of Press-forging Machines

机译：压锻机机制的实心建模与动态分析
- 作者：V.V. Telegin;A.M. Kozlov;V.I. Sakalo
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- solid model;
- mechanism;
- the dynamic model;
- stiffness;
- gap.;
29.Synthesis of Parameters of Executive Body of Continuous Action Mining Loading Machines

机译：连续动作采矿机械加载机器执行机构参数的合成
- 作者：I.P. Timofeev;M.A. Vasilyeva
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- loading machine;
- executive body;
- mathematical mode;
- trajectory;
- kinematic scheme;
- stockpile;
- executive body;
- feed-way of the conveyor;
- bedplate.;
30.Computational Probabilistic Evaluation Of Passenger Cars Noise Level

机译：乘用车噪声水平的计算概率评估
- 作者：A.V. Pobedin;V.V. Shekhovtsov;A.A. Dolotov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
31.Usage of Abrasive Grains with Controllable Shapes as Means of Grinding Wheels Operation Stabilization

机译：用可控形状的磨料颗粒用作磨轮操作稳定的手段
- 作者：N.V. Baidakova;T.N. Orlova
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- abrasive;
- grinding;
- shape of a grain.;
32.Research of Stress-Strained State of Pipelines Bundle with Damping Support Made of MR Material

机译：用MR材料制成的阻尼支撑压力应力调节状态研究
- 作者：A.M. Ulanov;S.A. Bezborodov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- Pipeline;
- vibration;
- damping coefficient;
- vibration stand;
- resonance;
- strain;
- MR material;
- ANSYS.;
33.Influence of Kinematic Perturbations on Shape-generating Movement Trajectory Stability

机译：运动扰动对形成运动运动轨迹稳定性的影响
- 作者：V.L. Zakovorotny;V.E. Gvindjilia
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
34.Contemporary achievements in the field of acoustic ignition systems

机译：隔音点火系统领域的当代成就
- 作者：Bogdanov V.V.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
- ignition system;
- Hartmann generator;
- acoustic ignition;
- rocket engine;
- thruster;
- resonance system;
35.Methods of assessing information signs describing the regimes of electrical networks

机译：评估描述电网制度的信息标志的方法
- 作者：Nagay V.I.;Nagay I.V.;Sarry S.V.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
- electrical networks;
- relay protection;
- information sign;
- normal and fault regime;
- short circuit;
- recognition;
36.Modeling of operation processes and reliability assurance of engineering machines under the multivariable time-varying random loading

机译：多变量时变随机加载下工程机器运行过程和可靠性保证的建模
- 作者：Berezin I.I.;Halturin V.K.;Abyzov A.A.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
- Multivariable loading;
- Random process;
- Microplastic deformation;
- Structural model of the environment;
- Fatigue failure;
37.A 6(10) kV cable section reliability assessment model including power distribution network configurations and relay protection circuits

机译：A 6（10）kV电缆截面可靠性评估模型，包括配电网络配置和继电保护电路
- 作者：Korzhov A.V.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
- reliability;
- power distribution network;
- power cable;
- insulation;
38.Research of spectral influence of vibration impact on the human spine

机译：振动影响对人脊柱的光谱影响研究
- 作者：Palatinskaya I.P.;Pirogova N.C.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
- vibroloading;
- spine human;
- modeling;
- the amplitude-frequency characteristics;
39.Correction of rotor rotation irregularity of permanent magnet synchronous motor in a controlled synchronous mode

机译：控制同步模式中永磁同步电动机转子旋转不规则的校正
- 作者：Voronin S.G.;Kurnosov D.A.;Korobatov D.V.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
- permanent magnet synchronous motor;
- oscillations damping;
- synchronous operating mode of PMSM;
40.Computer model of a synchronized asynchronous motor

机译：同步异步电动机的计算机模型
- 作者：Omelchenko E.Y.;Telezhkin O.A.;Enin S.S.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
- Synchronized asynchronous motor;
- computer model;
41.Surface as an object of computer geometric modelling

机译：表面作为计算机几何建模的对象
- 作者：Korotkiy V.A.;Usmanova E.A.;Khmarova L.I.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
42.Fatigue life prediction of engineering structures under multivariable random loading using structural model

机译：结构模型在多变量随机装载下工程结构的疲劳寿命预测
- 作者：Abyzov A.A.;Berezin I.I.;Sadakov O.S.
- 会议名称：《International Conference on Industrial Engineering》 | 2016年
- Multivariable loading;
- Random process;
- Microplastic deformation;
- Structural model of the environment;
- Fatigue failure;
43.Determining the Parameters of Grinding Wheels Working Surface Profile

机译：确定研磨轮工作表面轮廓的参数
- 作者：S.A. Kryukov;A.S. Kryukova
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- grinding wheel;
- working surface;
- parameters of the profile;
- abrasive.;
44.Assessing the Regenerative Effect Impact on the Dynamics of Deformation Movements of the Tool during Turning

机译：评估在转动过程中对工具变形运动动态的再生效应影响
- 作者：V.L. Zakovorotny;V.P. Lapshin;T.S. Babenko
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- model;
- deformation;
- cutting force;
- system dynamics.;
45.Creating Composite Materials Based on High-Nickel Alloys with the Use of a Plasma Arc at Current Reverse Polarity

机译：基于高镍合金创造复合材料，使用电流反极性等离子体弧
- 作者：D.S. Belinin;S.D. Neulybin;Yu.D. Schitsyn
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
46.Main Regularities of Elastic-Plastic Deformation and Brittle Failure in Micro Volumes of Abrasive Materials under Micro Pressure

机译：微压下微量磨料材料的弹性变形和脆性失效的主要规律
- 作者：O.I. Pushkarev;P.U. Bochkarev;I.V. Bashkirtseva
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- method of micro pressure;
- brittle fracture;
- micro volumes;
- origin;
- critical stress;
- the relative elastic deformation.;
47.Feasibility Study on the MAO- and SH-coated Cylinder Liners Application in ICE

机译：毛和Sh涂层衬套在冰中应用的可行性研究
- 作者：N.Yu. Dudareva;N.Kh. Musin
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- MAO;
- aluminium;
- spark hardened;
- cylinder liner;
- wear resistance.;
48.Study of Deformations Field in the Working Zone of Vertical Milling Machine

机译：垂直铣床工作区变形场的研究
- 作者：R.M. Khusainov;A.R. Sabirov;I.I. Mubarakshin
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- finite element analysis;
- rigidity;
- machine tools;
49.Results in Composite Hard-alloy and Mill Design Based on Simulation of Their Operation Conditions

机译：基于模拟其操作条件的复合硬合金和轧机设计
- 作者：B.Ya. Mokritskii;A.V. Morozova;T.I. Usova
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- composite carbide end mills;
- monolithic carbide end mills;
- prescribed accuracy;
- permissible variation.;
50.Method of Fuel Injection in Small Diesel Engines

机译：小柴油发动机燃油喷射方法
- 作者：E.A. Salykin;V.I. Lipilin;A.A. Skorobogatov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- small diesel;
- fuel feed;
- high pressure fuel pump;
- speed forsing.;
51.Modeling Tractive Effort Torque of Wheel in Deformation Movements of Pneumatic Tire Wheel

机译：气动轮胎轮胎变形运动的车轮造型牵引力扭矩
- 作者：V.P. Lapshin;I.A. Turkin
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- Model;
- deformation;
- torque moment;
- contact patch.;
52.Structural and Phase Transformation in Metals at High-Speed Cutting and Tool Wear

机译：高速切割和工具磨损金属结构和相变
- 作者：M.A. Skotnikova;N.A. Krylov;A.A. Popov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- cutting treatment;
- wear of tool;
- structure of chip;
- transmission and scanning electronic microscopy.;
53.The Condition of Machined Surface of Titanium Alloy in Dry Grinding

机译：干式研磨中钛合金加工表面的条件
- 作者：S.V. Nosenko;V.A. Nosenko;L.L. Kremenetskii
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- grinding;
- titanium alloy;
- surface structure;
- chemical composition;
- electron microscopy;
- X-ray spectral microanalysis.;
54.Usefulness of Using Elasticity of the Hoisting Tackle in Modeling the Electric Drive of the Main Hoist of the Overhead Casting Crane with Two Driving Motors

机译：利用吊装吊装的弹性在用两个驱动电动机模拟主葫芦主提升机的电动驱动中的有用性
- 作者：O.A. Gasiyarova;T.V. Baskova;A.S. Kulmukhametova
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- casting crane;
- main hoist mechanism;
- two-motor drive;
- math model of mechanical assemblies;
- elastic coupling;
- modeling;
- Bode magnitude diagram.;
55.The Effects of the Intake Pipe Configuration on Gas Exchange, and Technical and Economic Indicators of Diesel Engine with 21/21 Dimension

机译：进气管配置对21/21维度的柴油机的气体交换，技术和经济指标
- 作者：L.V. Plotnikov;S. Bernasconi;Yu.M. Brodov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- piston engines;
- gas exchange processes;
- gas dynamics;
- numerical simulation;
- ACTUS;
- improvement of diesel engines.;
56.The Influence of Graphite-Containing Nano-Additives on Thermo- Frost Resistance of Concrete

机译：含石石墨纳米添加剂对混凝土热霜抗性的影响
- 作者：R.A. Yanturina;B.Ya. Trofimov;R.M. Ahmedjanov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- nano-additives containing graphite;
- frost resistance;
- thermo-frost resistance;
- heat resistance;
- concrete;
- cement.;
57.Research on Influence of the Furnace Chamber Aerodynamics on Ecological Indicators of Boiler Plants (Part 1: Model of a Low-temperature Swirl Furnace)

机译：炉腔空气动力学对锅炉植物生态指标的影响研究（低温涡流炉的第1部分）
- 作者：A.P. Paramonov;M.R. Kadyrov;A.A. Trinchenko
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- boiler plant;
- emissions of pollutants;
- nitrogen oxide.;
58.The Rating Factors in of Jet Fuel Formation in Channel Spray Nozzles Diesel

机译：喷嘴喷嘴喷射喷嘴柴油燃料形成的评定因素
- 作者：V.S. Goun;V.S. Morozova;V.L. Polyacko
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- Spray cone;
- viscous flows;
- Navier-Stokes equations;
- conformal mapping.;
59.Methods of Accelerated Tests of Turbine Blades in Power Plants Operated under Multicomponent Loading Conditions

机译：多组分负载条件下电厂涡轮机叶片加速试验方法
- 作者：A.S. Gishvarov;M.N. Davydov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
60.Characteristics of Dynamic Analysis of Rotors in Foil Bearings with the Bump Foil

机译：用凸块箔的箔轴承转子动态分析特征
- 作者：A. Sytin;A. Rodichev;V. Tyurin
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- foil bearing;
- rotor dynamics;
- bump foil;
- the motion path of the rotor;
- bearing capacity.;
61.Dielectric Criteria of Colloidal Stability of Nanodispersed Ferrofluid Lubricating Oils

机译：纳米硼化铁磁流润滑油的胶体稳定性介质标准
- 作者：A.N. Bolotov;V.V. Novikov;O.O. Novikova
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- magnetic lubricant;
- magnetic liquid;
- colloidal stability;
- dielectric permittivity.;
62.Influence of Small Added Mass on Splitting Flexural Frequency Spectrum of Circular Ring with Initial Imperfection of Shape

机译：小额外质量对圆环分裂抗弯曲频谱的影响
- 作者：S.V. Seregin
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- a shell;
- a circular ring;
- initial irregularity;
- an added mass;
- bending vibration;
- splitting frequency spectrum.;
63.Tribotechnical Aspects of Wheel-Rail System Interaction

机译：轮轨系统相互作用的TresteChnice方面
- 作者：A. Keropyan;S. Gorbatyuk;A. Gerasimova
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
64.Theoretical Studies of Dust-Raising Characteristics of Heading Machines

机译：标题机的粉尘特性的理论研究
- 作者：I.E. Kolesnichenko;E.A. Kolesnichenko;V.B. Artemiev
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- development machine;
- dust-generating property;
- design parameters;
- hard-alloy insert;
- cutter pick;
- cutter head;
- coal dust.;
65.Kinematics of Spherical Milling Cutters Forming

机译：形成球形铣刀的运动学
- 作者：R.M. Khisamutdinov;I.Z. Sungatov;M.R. Khisamutdinov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- forming;
- profiling;
- helical surfaces;
- kinematics of formation;
- complex surfaces;
- spherical cutters.;
66.Influence of Deformation Effects on Wheeled Systems Dynamics

机译：变形效应对轮式系统动力学的影响
- 作者：M.V. Chuveyko;S.V. Nosachev
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- deformation;
- friction;
- elastic slip;
- deformation slip;
- wheeled system.;
67.Turbine Blades Profile and Surface Roughness Measurement

机译：涡轮叶片曲线和表面粗糙度测量
- 作者：S. Egorov;A. Kapitanov;D. Loktev
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- turbine blade;
- measurement process;
- profile;
- measurement method;
- contour measuring station;
- measuring instrument.;
68.Thermal Protection of Internal Combustion Engines Pistons

机译：内燃机活塞的热保护活塞
- 作者：N.Yu. Dudareva;R.D. Enikeev;V.Yu. Ivanov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- Internal combustion engines;
- thermal protection;
- coating;
- piston microarc oxidation.;
69.Design of Five-Bar Screw-Lever Manipulator and Optimization of its Output Link Path of Motion

机译：五条螺旋杆式机械手设计及其输出链路运动的优化
- 作者：A. Fomin;W. Ivanov;J. Paik
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- mechanism;
- kinematic pair;
- trajectory;
- internal surface.;
70.Experimental Investigation of Fluidic Diodes

机译：流体二极管的实验研究
- 作者：D.F. Khabarova;A.V. Podzerko;E.K. Spiridonov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- fluidic diodes;
- hydraulic resistance;
- diodicity;
- vortex diode;
- Reynolds number;
- experimental study.;
71.Kinematics and Dynamics of Chip Formation during Grinding

机译：研磨过程中芯片形成的运动学和动态
- 作者：O.G. Kulik;V.A. Demenkov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- grinding;
- abrasive grain;
- the process of chip formation;
- high-speed grinding;
- the contact area;
- the shear stress;
- hardening.;
72.Determination of Basic Dynamic Vibration Frequency at Trapezoid Plates Using Conformal Radius Ratio Interpolation Technique

机译：用保形半径比插值技术确定梯形板基本动态振动频率
- 作者：A. Korobko;A. Chernyaev;V. Korobko
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- Trapezoid plates;
- dynamic vibration;
- basic frequency;
- conformal radius;
- form factor interpolation technique.;
73.Surface Temperature Modeling and Analysis during Cladding of Technological Equipment Guide by Wire Tool

机译：电线工具技术设备指南覆盖过程中的表面温度建模与分析
- 作者：A.V. Zotov;D.A. Rastorguev;R.R. Dema
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- Cladding;
- Flexible tool;
- Wire tool;
- Surface temperature;
- Wear resistance.;
74.Performance Evaluation of Internal Combustion Engines Silencers based on Comparative Testing of Their Characteristics on Non-Motorized Test Stand

机译：基于对非机动试验台特征的比较检测，内燃机沉默能说明的性能评估
- 作者：G.I. Pavlov;O.R. Sitnikov;K.A. Valeeva
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
75.Quality Assessment of Emery Cloth-based Abrasive Tool Using Elasticity Technological Parameter

机译：利用弹性技术参数对砂布磨料工具的质量评估
- 作者：N.V. Syreyshchikova;D.Yu. Pimenov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- coated abrasive;
- belt grinding;
- blade of abrasive cloth wheel;
- elasticity;
- quality assessment;
- method;
- recommendations.;
76.Influence of Engine Load on Concrete Pump Operating Parameters

机译：发动机负荷对混凝土泵操作参数的影响
- 作者：Ye. Koshkarev
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- two-piston concrete pump;
- fluid power;
- valve (gate);
- load factor;
- paddle screw mixer;
- feed bin;
- hydraulic ram;
- concrete ram.;
77.Enhancing Performances of Micro-Grinding of BK-7 Glass through Modification of PCD Micro-Tool

机译：通过修改PCD微型工具，增强BK-7玻璃微型研磨的性能
- 作者：A. Pratap;K. Patra;A.A. Dyakonov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- Micro-grinding;
- Glass;
- Surface roughness;
- Tool wear.;
78.Complex Method of Detection Reliable Precursors of Stressed Rock Samples Failure

机译：复杂的检测方法可靠性岩石样品失败的可靠前体
- 作者：A.M. Golosov;V.V. Makarov;N.A. Opanasiuk
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- rock sample;
- deformation;
- acoustic emission;
- precursors;
- complex method.;
79.Predictive Reliability Assessment of Loading and Transport Modules of Tunneling Equipment during Construction of Road Tunnels

机译：道路隧道施工过程中隧道设备装载和运输模块的预测可靠性评估
- 作者：A. Nosenko;A. Domnitskiy;E. Shemshura
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- tunneling equipment;
- road tunnels;
- loading and transport modules;
- reliability;
- reliability assessment.;
80.Review of Experimental Studies of Cold-Formed Steel Channels with Slotted Webs under Bending

机译：弯曲下开槽纤维网的冷成型钢通道的实验研究回顾
- 作者：N.V. Degtyareva
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- Thermal studs;
- channel beams;
- slotted webs;
- perforated webs;
- bending;
- direct strength method.;
81.Complex Analysis of Edge Cutting Machining of Periodic Profiles

机译：周期型材边缘切割加工复杂分析
- 作者：R. Anisimov;A. Tarapanov;N. Kanatnikov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
82.Study of Ceramic-Matrix Composites Tribological Properties Paired with Cermet

机译：陶瓷基复合材料的研究与金属陶瓷配对
- 作者：A.P. Garshin;V.I. Kulik;A.S. Nilov
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- Friction materials;
- Ceramic-matrix composites (CMC);
- Silicon carbide matrix;
- Cermet;
- Tribological properties.;
83.Influence of Finishing Methods of Treatment on Condition of Steel 36NiCrMo16 Part Surface Layer

机译：钢结构处理方法对钢36肌射出条件的影响
- 作者：J.L. Tchigirinsky;I.V. Firsov;P.S. Nesterenko
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
84.Mathematical Model of Dynamics of Air Cushion Vehicle with Ballonet Type Skirt on Water

机译：气囊型裙边气垫车辆动力学的数学模型
- 作者：V.O. Eremeyev;F.S. Peplin;A.V. Tumanin
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- Air-cushion vehicle;
- ballonet type skirt;
- mathematical model;
- towing tank;
- model test.;
85.Estimation of Novikov Gearing Loading Capacity Based om Integral Strain Gauges Application

机译：基于整体应变仪应用的NoviTov传动承载能力估算
- 作者：K. Syzrantseva;V. Syzrantsev
- 会议名称：《International Conference on Industrial Engineering》 | 2018年
- Novikov gearing;
- loading capacity;
- fatigue damages;
- Integral Strain Gauges;
- Finite Element Method.;
86.Properties of Epoxy-Diane Composites Modified by Techno-Genic Fillers

机译：技术填料改性环氧-二烯复合材料的性能
- 作者：N.Yu. Kiryushina;A.Yu. Semeykin
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
87.Assessment of Fire Safety of Coatings Based on Silicate Paint Sol

机译：硅酸盐涂料溶胶涂料的防火安全性评价
- 作者：Valentina I. Loganina;Yerkebulan B. Mazhitov;Yuri P. Skachkov
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- poly-silicate binder;
- coatings;
- flammability;
- resistance;
88.To the Question of an Experimental Assessment of the Fatigue Characteristics of a Transversal Metal-Composite Compound

机译：横向金属复合材料疲劳特性的实验评估问题
- 作者：Mikhail V. Astahov;Irina I. Sorokina;Ekaterina V. Slavkina
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- polymer composite material;
- fastener;
- transversal connection;
- dynamic tests;
- fastening element;
89.Study of Electromagnetic Effect Parameters Influence on Fluidity of Fine Nd-Fe-B Powder

机译：电磁效应参数对Nd-Fe-B细粉流动性影响的研究
- 作者：I.N. Egorov;N.Ya. Egorov
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- fluidity;
- Nd-Fe-B powder;
- magnetic fields;
- electromagnetic effect;
- magneto-fluidized bed;
90.Modeling of Tool for Cold Extrusion of Steel and Tooling with Proportional Bandaging

机译：钢材冷挤压模具建模及比例包扎模具
- 作者：Alia Gerasimova;Sergey Gorbatyuk;Dmitry Efremov
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- cold stamping;
- modeling;
- variable stress;
- rim;
- tooling;
- matrix;
- pressure;
91.Cast Iron and Steel Smelting in Induction Crucible Furnaces of Industrial Frequency

机译：在工频感应坩埚炉中熔炼铸铁和钢
- 作者：Viktor A. Kukartsev;Vladislav V. Kukartsev;Vadim S. Tynchenko
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- induction crucible furnace;
- medium frequency induction;
- industrial frequency induction;
- acid lining;
- quartzite;
- steel;
92.Process Development for Solid Fuel Use at Siderite Ore Roasting in Shaft Furnace

机译：竖炉焙烧菱铁矿固体燃料的工艺开发
- 作者：Boris Yurev;Vyacheslav Dudko
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- siderite ore;
- roasting;
- solid fuel;
- kinetics;
- temperature;
- shaft furnace;
- lean coal;
93.Quantitative Assessment of Dissipative Properties of Superficial Structure of the Steel 25XM Strengthened by Pulse Laser Influence

机译：脉冲激光强化25XM钢表面组织耗散特性的定量评估
- 作者：Vladimir A. Kim;Aung Ngwe Thein
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- microstructures;
- high-concentrated energy stream;
- microhardness;
- heat-affected zone (HAZ);
94.An Effect of the Epoxy Cementing Technology on the Deformation of the Optical External Surfaces Made of Quartz Glass

机译：环氧树脂粘接工艺对石英玻璃光学外表面变形的影响
- 作者：Dmitry Kruchinin;Yulia Aleshina;Elena Farafontova
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- cementing;
- cemented optical assembly;
- deformation of the optical surface;
- hydro-mechanical method;
95.Peculiarities of Heat and Mass Transfer in Porous Moistened Mediums at High Thermal Loads

机译：多孔湿介质在高热负荷下的传热传质特性
- 作者：Vyacheslav S. Kuzevanov;Galina S. Zakozhurnikova;Sergey S. Zakozhurnikov
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- resistance furnace;
- batch;
- drying process;
- filtration;
- moisture;
- condensation;
96.Influence of Plasticizers on the Properties of Fine-Grained Polymer Concrete

机译：增塑剂对细颗粒聚合物混凝土性能的影响
- 作者：F.L. Kapustin;A.F. Kapustin
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- plasticizer;
- concrete mix;
- composition;
- mobility;
- strength;
97.Study of the Diffusion Interaction between Titanium and Aluminum in the Composition AMg6-AD1-VT1-0 after Rolling with Different Compression

机译：AMg6-AD1-VT1-0复合材料在不同压缩条件下轧制后钛铝扩散相互作用的研究
- 作者：D.N. Gurulev;L.V. Palatkina
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- rolling;
- deformation;
- explosion welding;
- the temperature of the rolling;
- diffusion;
- titanium;
- aluminum;
- composite material;
98.The Effect of Polyvinyl Alcohol on the System of Cement-Free Binding Alumino-Silicate Composition

机译：聚乙烯醇对无水泥粘结硅酸铝复合体系的影响
- 作者：Valeria Strokova;Mariana Sivalneva;Vadim Kobzev
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- cement-free binding materials;
- aluminosilicate material;
- polyvinyl alcohol;
99.The Use of Hard Alloy Waste in Composite Galvanic Coatings for the Restoration of Car Parts

机译：硬质合金废料在汽车零件修复用复合电镀涂层中的应用
- 作者：Boris A. Semenikhin;Lyubov P. Kuznetsova;Vladimir I. Kozlikin
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- hard alloy;
- waste;
- powder;
- composite galvanic coatings (CGC);
- electro-erosion dispersion (EED);
- electrolyte;
100.Influence of Thermomagnetic Treatment on the Damping Properties and Structure of Iron-Based Alloys

机译：热磁处理对铁基合金阻尼性能和结构的影响
- 作者：A.I. Scvortsov;M.A. Melchakov;A.A. Scvortsov
- 会议名称：《International Conference on Industrial Engineering》 | 2019年
- Fe alloys;
- thermomagnetic treatment;
- damping properties;
- structure;