Structures and tribological performances of PEEK (poly-ether-ether-ketone)-based coatings designed for tribological application

摘要

Driven by economical and ecological reasons, thermoplastic-based coatings become a potential solution for anti-wear purpose. Two coating design concepts, flame spraying and printing PEEK (poly-ether-ether-ketone)-based coatings on Al substrate, were introduced in this paper. An amorphous PEEK coating was obtained by these two techniques. After being annealed, the coating presents a semi-crystalline structure. The friction and wear behaviors of PEEK-based coatings were investigated by means of ball-on-disc tests. The results show that PEEK coatings exhibit an excellent tribological performance with a relatively low coefficient of friction and wear rate. The semi-crystalline PEEK coating exhibits a lower friction coefficient and wear rate than the amorphous one. The additions of micron-sized particles such as SiC and graphite in PEEK coating can improve significantly the coating wear resistance. (c) 2007 Elsevier B.V. All rights reserved.