首页> 外文期刊>IEEE Transactions on Robotics >Catadioptric Visual Servoing From 3-D Straight Lines
【24h】

Catadioptric Visual Servoing From 3-D Straight Lines

机译:通过3-D直线实现折反射式视觉伺服

获取原文
获取原文并翻译 | 示例
       

摘要

In this paper, we consider the problem of controlling a 6 DOF holonomic robot and a nonholonomic mobile robot from the projection of 3-D straight lines in the image plane of central catadioptric systems. A generic central catadioptric interaction matrix for the projection of 3-D straight lines is derived using an unifying imaging model valid for an entire class of cameras. This result is exploited to design an image-based control law that allows us to control the 6 DOF of a robotic arm. Then, the projected lines are exploited to control a nonholonomic robot. We show that as when considering a robotic arm, the control objectives are mainly based on catadioptric image feature and that local asymptotic convergence is guaranteed. Simulation results and real experiments with a 6 DOF eye-to-hand system and a mobile robot illustrate the control strategy.
机译:在本文中,我们考虑了从中央折反射系统的像平面中的3D直线投影控制6自由度完整机器人和非完整移动机器人的问题。使用对整个摄像机类别均有效的统一成像模型,得出用于3-D直线投影的通用中央折反射交互矩阵。利用该结果来设计基于图像的控制定律,该定律允许我们控制机械臂的6自由度。然后,利用投影线来控制非完整机器人。我们表明,当考虑使用机械臂时,控制目标主要基于折反射图像特征,并且可以保证局部渐近收敛。仿真结果和使用6自由度手控系统和移动机器人的实际实验说明了控制策略。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号