A 0.4-to-4-GHz All-Digital RF Transmitter Package With a Band-Selecting Interposer Combining Three Wideband CMOS Transmitters

摘要

A single-output, band selecting interposer is designed to combine three identical all-digital CMOS transmitter (Tx) chips. The open-drain CMOS Txs are flip-chip connected to the primary windings of three frequency selecting transformers realized on a single PCB interposer. The secondary windings of the three transformers are connected in series and they share a single output. Across 0.4 to 4 GHz, a peak power higher than 22.9 dBm is achieved collectively by the three sub-Txs with a drain efficiency (DE) better than 25%. The peak powers/DE of the three sub-Txs are 28.6 dBm/50%, 27.4 dBm/49%, and 24.7 dBm/34%, at 0.85, 2.1, and 3 GHz, respectively. This paper further demonstrates that the band selection can be achieved via reconfiguring the CMOS inverse Class-D switching power amplifiers. As demonstrated via continuous wave and 64-quadratic-amplitude modulation, WLAN, and LTE modulation tests, the reconfigurable Tx package exhibits high power and efficiency across all supported bands.