首页> 外文期刊>Finite Elements in Analysis and Design >Bifurcation and post-bifurcation of an inflated and extended residually-stressed circular cylindrical tube with application to aneurysms initiation and propagation in arterial wall tissue
【24h】

Bifurcation and post-bifurcation of an inflated and extended residually-stressed circular cylindrical tube with application to aneurysms initiation and propagation in arterial wall tissue

机译:充气和延伸残余应力圆柱管的分叉和后分叉,在动脉瘤在动脉壁组织中的发生和传播中的应用

获取原文
获取原文并翻译 | 示例

摘要

A numerical procedure to analyze bifurcation and post-bifurcation of a finite deformation boundary-value problem for a residually-stressed elastic body is studied. In particular, the problem is the combined extension and inflation of a circular cylindrical tube subject to radial and circumferential residual stresses. The material model, given by a residual-stress dependent nonlinear elastic constitutive law in terms of invariants, is implemented in a finite element code. A numerical procedure to analyze the bifurcation and post-bifurcation of the finite deformation boundary-value problem at hand is developed based on the modified Riks method. The dependence of bifurcation and post-bifurcation behavior of tubes under the loading at hand on residual stresses is shown and compared with results when there is no residual stress. The finite deformation boundary-value problem is described mainly in terms of the inflation pressure, as well as the axial and azimuthal stretches of the tube. The dependence of these quantities on bifurcation is illustrated graphically for different values of the parameters (in dimensionless form) involved, in particular, the strength of the residual stress. It is found that bulging bifurcation is expected for sufficiently large values of the axial stretch. On the other hand, for small values of the axial stretch (close to the non-extended configuration), the onset of bifurcation is found to be the bending mode. Furthermore, for the latter case in subsequent motion, i.e. post-bifurcation, it is shown that bending triggers bulging as opposed to the situation in which bending is not allowed and the onset of bifurcation is associated with bulging. In addition, the bulge, or the abnormal enlargement, that is formed during post-bifurcation after the onset of bending bifurcation appears on one side of the tube showing an irregular shape which is consistent with the development of abdominal aortic aneurysms (AAA).
机译:研究了一种分析残余应力弹性体有限变形边值问题的分叉和后分叉的数值程序。特别地,问题在于圆柱形管在径向和周向残余应力作用下的伸展和膨胀的组合。通过不变量,由依赖于残余应力的非线性弹性本构定律给出的材料模型以有限元代码实现。在改进的Riks方法的基础上,建立了数值分析程序,分析了有限变形边值问题的分叉和后分叉。显示了在手头负载下管的分叉和分叉后行为对残余应力的依赖性,并与没有残余应力时的结果进行了比较。有限变形的边界值问题主要用充气压力以及管子的轴向和方位角拉伸来描述。对于涉及的参数(无量纲形式)的不同值,特别是残余应力的强度,以图形方式说明了这些量对分叉的依赖性。已经发现,对于足够大的轴向拉伸值,期望有鼓胀的分叉。另一方面,对于轴向拉伸的较小值(接近于非延伸构型),发现分叉的开始是弯曲模式。此外,对于在随后的运动中的后一种情况,即后分叉,示出了与不允许弯曲并且分叉的开始与凸起相关的情况相反,弯曲触发凸起。此外,在弯曲分叉开始后的分叉后形成的隆起或异常增大出现在管的一侧,显示出不规则形状,这与腹主动脉瘤(AAA)的发展相一致。

著录项

  • 来源
    《Finite Elements in Analysis and Design》 |2019年第9期|51-60|共10页
  • 作者单位

    Univ Politecn Madrid, Dept Continuum Mech & Struct, Escuela Caminos Canales & Puertos, E-28040 Madrid, Spain;

    Univ Politecn Madrid, Dept Continuum Mech & Struct, Escuela Caminos Canales & Puertos, E-28040 Madrid, Spain;

    JK Tyre, Hari Shankar Singhania Elastomer & Tyre Res Inst, Mysore, Karnataka, India;

    Univ Seville, Sch Engn, Grp Elasticidad & Resistencia Mat, Camino Descubrimientos S-N, Seville 41092, Spain;

    Univ Politecn Madrid, Dept Continuum Mech & Struct, Escuela Caminos Canales & Puertos, E-28040 Madrid, Spain;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Residual stress; Bending bifurcation; Bulging bifurcation; Nonlinear elasticity; Artery; Aneurysms;

    机译:残余应力;弯曲分叉;膨胀分叉;非线性弹性;动脉;动脉瘤;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号