Sticker-Type Hybrid Photoplethysmogram Monitoring System Integrating CMOS IC With Organic Optical Sensors

摘要

A sticker-type system with hybrid integration of CMOS IC and organic optical sensors is proposed to monitor photoplethysmogram (PPG) signals. To solve problems with the previous solely organic sensor-based works, CMOS IC is implemented in 180 nm technology under 5 V/1.5 V dual power supply. The silver-wire printed planar-fashionable circuit board (P-FCB) is used to connect the CMOS IC with organic sensors. The proposed hybrid system has the five following key features: 1) Power-efficient structure of organic sensor; 2) Integrated analog front-end and digital processor; 3) Degradation compensation scheme; 4) Large parasitic elements optimized design; and 5) Motion artifact rejection scheme. The sticker-type PPG monitoring system has mass of only 2g, including the batteries, and consumes only 233 μW to operate. The PPG signal could be acquired from various body parts (finger, wrist, and neck). The peripheral oxygen saturation level (SpO2) extraction results are verified by comparison with a commercial sensor device.