Out-of-plane seismic response of vertically spanning URM walls connected to flexible diaphragms

摘要

A simplified numerical model was used to investigate the out-of-plane seismic response of vertically spanning unreinforced masonry (URM) wall strips. The URM wall strips were assumed to span between two flexible diaphragms and to develop a horizontal crack above the wall mid-height. Three degrees of freedom were used to accommodate the wall displacement at the crack height and at the diaphragm connections, and the wall dynamic stability was studied. The equations of dynamic motion were obtained using principles of rocking mechanics of rigid bodies, and the formulae were modified to include semi-rigid wall behaviour. Parametric studies were conducted that included calculation of the wall response for different values of diaphragm stiffness, wall properties, applied overburden, wall geometry and earthquake ground motions. The results of the study suggest that stiffening the horizontal diaphragms of typical low-rise URM buildings will amplify the out-of-plane acceleration demand imposed on the wall and especially on the wall-diaphragm connections. It was found that upper-storey walls connected to two flexible diaphragms had reduced stability for applied earthquake accelerograms having dominant frequency content that was comparable with the frequency of the diaphragms. It was also found that the applied overburden reduced wall stability by reducing the allowable wall rotations. The results of this study suggest that the existing American Society of Civil Engineers recommendations for assessment of vertically spanning walls overestimate the stability of top-storey walls in multi-storey buildings in high-seismic regions or for walls connected to larger period (less stiff) diaphragms. Copyright (c) 2015 John Wiley & Sons, Ltd.