BackgroundThe aim of this study was to compare displacements and stress after en masse retraction of mandibular dentition with lingual and labial orthodontics using three-dimensional (3D) finite element models (FEM).MethodsA 3D FEM of each lower tooth was constructed and located as appropriate to Roth's prescription. The 0.018-in. GAC Roth Ovation labial and Ormco 7th Generation lingual brackets were virtually bonded to the lower teeth and threaded with 0.018 × 0.025- and 0.016 × 0.022-in. SS labial (Tru-Arch form, small size) and lingual (mushroom) archwires. En masse retraction was simulated by applying 300?g of distal force from the canine to the second premolar on the 0.016 × 0.022-in. SS labial and lingual archwires. The type of finite element used in the analysis was an eight-noded brick element. The Algor program (Algor Inc., Pittsburgh, PA, USA) was used to calculate the strains and displacements at each nodal point.ResultsLingual tipping and extrusion of the anterior dentition occurred with both archwires. At the premolars and first molars, intrusion, lingual movements, and lingual tipping were seen with the labial archwire, while intrusion was accompanied by labial movements, mesial tipping, and buccal rotation with lingual mechanics.ConclusionsLingual vs. labial bracket placement influences the pattern of tooth movement, but the stress that occurs around the teeth can be accurately mapped using a 3D FEM model.
展开▼
