首页> 外文期刊>International Journal of Science and Qualitative Analysis >Elaboration and Characterization of Li (Nisub1/3/subCosub1/3/subMnsub1/3/sub) Osub2/sub Intrinsic and Cu Doped
【24h】

Elaboration and Characterization of Li (Nisub1/3/subCosub1/3/subMnsub1/3/sub) Osub2/sub Intrinsic and Cu Doped

机译:Li(Ni 1/3 Co 1/3 Mn 1/3 )O 2 本征的表征和铜掺杂

获取原文
       

摘要

In this work we have synthesized Li (Nisub1/3/subCosub1/3/subMnsub1/3/sub) Osub2/sub using sulfates metals Ni, Co and Mn and LiCl salt. The used method is easy and led to yield higher than 75%. Identification and lamellar α-type NaFeOsub2/sub of the composite synthesized were demonstrated by X-ray diffraction and FTIR spectroscopy. We demonstrated that the product is pure and its crystallinity changes according to the parameters of the annealing step. The electronic structure of the compound has been modified by doping with monovalent Cupper cation. The results are encouraging and show that the lamellar structure is not altered. We noticed an increase in infill distances that can affect the mobility of lithium cations during the insertion cycles / extraction. Indeed, the charge on the surface of the doped product is -90mV after 60 minutes and that of the undoped compound is -241mV.
机译:在这项工作中,我们合成了Li(Ni 1/3 Co 1/3 Mn 1/3 )O 2 使用硫酸盐金属镍,钴,锰和氯化锂盐。所使用的方法简便易行,收率高于75%。通过X射线衍射和FTIR光谱对合成的复合材料进行了鉴定和层状α型NaFeO 2 。我们证明了该产品是纯净的,并且其结晶度根据退火步骤的参数而变化。该化合物的电子结构已通过掺杂一价铜阳离子进行修饰。结果令人鼓舞,并且表明层状结构没有改变。我们注意到填充距离的增加会影响插入/插入过程中锂阳离子的迁移率。实际上,在60分钟后,掺杂产品表面的电荷为-90mV,而未掺杂化合物的表面电荷为-241mV。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号