首页> 外文期刊>Computer methods in biomechanics and biomedical engineering >Boundary layer considerations in a multi-layer model for LDL accumulation
【24h】

Boundary layer considerations in a multi-layer model for LDL accumulation

机译:LDL累积的多层模型中的边界层注意事项

获取原文
获取原文并翻译 | 示例

摘要

Boundary layer effects for Low-Density Lipoprotein (LDL) concentration problems in a multi-layer artery model are analyzed in this work. Both a straight artery and aorta-iliac bifurcation are analyzed. Mass, momentum and species governing equations are based on the porous media theory and solved with the commercial finite-element based code COMSOL Multiphysics. For the straight artery, various inlet velocities, arterial sizes and intramural pressure values are investigated. Results are presented in terms of concentration profiles close to the lumen/endothelium interface and boundary layer thickness. It is shown that the boundary layer is affected by all of the three analyzed parameters. The results in this work will further clarify the concentration polarization effects imposed by the arterial wall.
机译:在这项工作中分析了多层动脉模型中低密度脂蛋白(LDL)浓度问题的边界层效应。笔直的动脉和or主动脉分叉。质量,动量和物质控制方程基于多孔介质理论,并使用基于商业有限元代码COMSOL Multiphysics求解。对于直动脉,研究了各种入口速度,动脉大小和壁内压力值。结果以接近管腔/内皮界面和边界层厚度的浓度分布表示。结果表明,边界层受所有三个分析参数的影响。这项工作的结果将进一步阐明动脉壁施加的浓度极化效应。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号