首页> 外文期刊>Circuits, systems, and signal processing >Spectral Analysis of UPWM Signals for Filterless Digital Class D Power Amplifiers
【24h】

Spectral Analysis of UPWM Signals for Filterless Digital Class D Power Amplifiers

机译:无限控数字D类功率放大器的UPWM信号光谱分析

获取原文
获取原文并翻译 | 示例
           

摘要

Filterless digital class D power amplifiers usually utilize three-level uniform sampling pulse width modulation (UPWM) technique to convert the digital input signal into a UPWM signal which is used to drive the power stage. Therefore, the spectral estimation expressions for different three-level UPWM signals obtained by modulating the digital signal can be an evaluation tool for signal distortion and electromagnetic interference when filterless digital class D power amplifiers are designed. Based on the time-domain characteristics of three-level UPWM signals, the spectral estimation expressions for six types of three-level UPWM signals are proposed in this paper by using the discrete Fourier transform technique and the frequency response of the zero-order holder. According to these expressions, the relationships among the total harmonic distortion, the pulse repetition frequency and the pulse width resolution of the UPWM signal are studied. A UPWM generator test system based on field-programmable gate array is designed and implemented to measure the spectra of different UPWM signals. The measured results are compared with the calculated results obtained by the proposed expressions to verify the correctness of the proposed expressions.
机译:无限制的数字D类功率放大器通常利用三级均匀采样脉冲宽度调制(UPWM)技术将数字输入信号转换为用于驱动电源级的UPWM信号。因此,通过调制数字信号而获得的不同三级UPWM信号的光谱估计表达式可以是用于设计无滤波数字D类功率放大器时的信号失真和电磁干扰的评估工具。基于三级UPWM信号的时域特性,通过使用离散的傅里叶变换技术和零级保持器的频率响应,提出了六种类型的三级UPWM信号的光谱估计表达式。根据这些表达,研究了谐波失真,脉冲重复频率和UPWM信号的脉冲宽度分辨率之间的关系。设计并实现了基于现场可编程门阵列的UPWM发生器测试系统,以测量不同UPWM信号的光谱。将测量结果与所提出的表达式获得的计算结果进行比较,以验证拟议表达的正确性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号