GaN-based light-emitting diode with ZnO nanotexture layer prepared using hydrogen gas

摘要

ZnO films were deposited on indium tin oxide (ITO), which formed the transparent conductive layer (TCL) of a GaN-based light-emitting diode (LED), by ultrasonic spraying pyrolysis to increase the light output power. The ZnO nanotexture was formed by treating the as-deposited ZnO films with hydrogen. The root mean square (RMS) roughness increased from 4.47 to 7.89 nm before hydrogen treatment to 10.82-15.81 nm after hydrogen treatment for 20 min. Typical current-voltage (Ⅰ-Ⅴ) characteristics of the GaN-based LEDs With a ZnO nanotexture layer have a forward-bias voltage of 3.25 V at an injection current of 20 mA. The light output power of a GaN-based LED with a ZnO nanotexture layer improved to as much as about 27.5% at a forward current of 20 mA.