Conductor development for a wide bore 10 T Nb3Sn modeldipole magnet

摘要

An 87.8 mm bore single aperture 10 T Nb3Sn model dipole magnet is under development as a next step in the realization of high-field Nb3Sn dipole magnets. The magnet is a 2 layer cos(θ)-dipole model as an alternative for the proposed NbTi D1 beam separator magnets for the LHC. After completion of the general magnetic and mechanical design, all attention is focused on the manufacturing and cabling of a novel powder-in-tube Nb3Sn conductor. This Nb3Sn conductor is characterized by a high non-Cu Jc of 2680 A/mm2 at 10 T with an effective filament size of about 20 μm. Cabling should result in a Rutherford type of cable exhibiting a moderate Jc degradation due to the cabling process itself, a low transverse stress sensitivity and a controllable minimum value of Rc. The conductor development program is presented and the results are evaluated. Progress on the actual realization of the coils is briefly described