首页> 美国卫生研究院文献>Journal of Applied Clinical Medical Physics >Surface imaging laser positioning or volumetric imaging for breast cancer with nodal involvement treated by helical TomoTherapy
【2h】

Surface imaging laser positioning or volumetric imaging for breast cancer with nodal involvement treated by helical TomoTherapy

机译:螺旋TomoTherapy治疗的淋巴结转移性乳腺癌的表面成像激光定位或体积成像

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A surface imaging system, Catalyst (C‐Rad), was compared with laser‐based positioning and daily mega voltage computed tomography (MVCT) setup for breast patients with nodal involvement treated by helical TomoTherapy. Catalyst‐based positioning performed better than laser‐based positioning. The respective modalities resulted in a standard deviation (SD), 68% confidence interval (CI) of positioning of left–right, craniocaudal, anterior–posterior, roll: 2.4 mm, 2.7 mm, 2.4 mm, 0.9° for Catalyst positioning, and 6.1 mm, 3.8 mm, 4.9 mm, 1.1° for laser‐based positioning, respectively. MVCT‐based precision is a combination of the interoperator variability for MVCT fusion and the patient movement during the time it takes for MVCT and fusion. The MVCT fusion interoperator variability for breast patients was evaluated at one SD left–right, craniocaudal, ant–post, roll as: 1.4 mm, 1.8 mm, 1.3 mm, 1.0°.There was no statistically significant difference between the automatic MVCT registration result and the manual adjustment; the automatic fusion results were within the 95% CI of the mean result of 10 users, except for one specific case where the patient was positioned with large yaw. We found that users add variability to the roll correction as the automatic registration was more consistent.The patient position uncertainty confidence interval was evaluated as 1.9 mm, 2.2 mm, 1.6 mm, 0.9° after 4 min, and 2.3 mm, 2.8 mm, 2.2 mm, 1° after 10 min. The combination of this patient movement with MVCT fusion interoperator variability results in total standard deviations of patient position when treatment starts 4 or 10 min after initial positioning of, respectively: 2.3 mm, 2.8 mm, 2.0 mm, 1.3° and 2.7 mm, 3.3 mm, 2.6 mm, 1.4°.Surface based positioning arrives at the same precision when taking into account the time required for MVCT imaging and fusion. These results can be used on a patient‐per‐patient basis to decide which positioning system performs the best after the first 5 fractions and when daily MVCT can be omitted. Ideally, real‐time monitoring is required to reduce important intrafraction movement.PACS number(s): 87.53.Jw, 87.53.Kn, 87.56.Da, 87.63.L‐, 81.70.Tx
机译:将表面成像系统Catalyst(C‐Rad)与基于激光的定位和每日兆电压计算机断层扫描(MVCT)设置进行了比较,以螺旋X线断层扫描术治疗患有淋巴结转移的乳腺患者。基于催化剂的定位比基于激光的定位性能更好。各自的模式导致标准偏差(SD),左右,颅尾,前后前后滚动位置的置信区间(CI)为68%:催化剂定位为2.4 mm,2.7 mm,2.4 mm,0.9°,基于激光的定位分别为6.1 mm,3.8 mm,4.9 mm,1.1°。基于MVCT的精度是MVCT融合的互操作性差异与MVCT和融合所需时间中患者运动的结合。乳腺患者的MVCT融合互操作者变异性以1.4 SD,1.8 mm,1.3 mm,1.0°左右SD,左,右,颅尾,蚁柱,横滚进行评估。自动MVCT注册结果之间无统计学差异和手动调整;自动融合结果在10位使用者的平均结果的95%CI之内,除了一种特定情况下,患者的偏航位置很大。我们发现,由于自动套准更加一致,用户为侧倾校正增加了可变性。患者位置不确定性置信区间在4分钟后评估为1.9 mm,2.2 mm,1.6 mm,0.9°,以及2.3 mm,2.8 mm,2.2 mm,10分钟后1°。这种患者运动与MVCT融合互操作性的可变性相结合,导致在初始定位分别开始4或10分钟后开始治疗时,患者位置的总标准偏差为:2.3 mm,2.8 mm,2.0 mm,1.3°和2.7 mm,3.3 mm 2.6毫米,1.4度。考虑到MVCT成像和融合所需的时间,基于表面的定位具有相同的精度。这些结果可用于每个患者,以决定哪个定位系统在前5个分数之后表现最佳,以及何时可以省略每日MVCT。理想情况下,需要进行实时监控以减少重要的分数运动.PACS编号:87.53.Jw,87.53.Kn,87.56.Da,87.63.L-,81.70.Tx

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号