陀螺稳定系统参数测试仪设计

摘要

设计了一种陀螺稳定系统参数测试仪,主要用于对舰载陀螺稳定系统各环节进行参数测试,直观显示参数信息,并可通过网口串口发往其他设备;仪器不仅能多路采集信号,也可采集一些特殊信号如多路接收检测同步机转角信号、旋转变压器转角信号、电平信号、脉冲信号等;仪器检测精度可达2个角分,检测时间由以前的3小时缩短为20～30分钟;经上舰验证,该仪器对于检测设备是否正常,判断精度是否满足技术指标,提高维修检测有很大的帮助作用.%A parameter detector of the top steady system was designed, which is mainly used for parameter detection of each link of the system, and show us every parameter directly and then send it by network or serial port.It can not only get signal from several channels at the same time, but also get some special signal such as angle signal of synchronous machine, angle signal of rotary transformer, level signal and pulse signal, etc.The precision of the detector reached to 2', and the time it takes decreased to 20-30 minutes from 3 hours before.The results from the ship show that it will be a great help for us to detect the instrument, judge the precision and improve the efficiency of repairment of the top steady system.