Variation-aware circuit and chip level power optimization in digital VLSI systems.

摘要

In today's IC design, one of the key challenges is the increase in power consumption of the circuit which in turn shortens the service time of battery-powered electronics, and increases the cooling and packaging costs of server systems. On the other hand, with the increasing levels of variability in the characteristics of nanoscale CMOS devices and VLSI interconnects and continued uncertainty in the operating conditions of VLSI circuits, achieving power efficiency and high performance in electronic systems under process, voltage, and temperature (PVT) variations has become a daunting, yet vital, task.;This dissertation investigates power optimization techniques in CMOS VLSI circuits both at circuit level and chip level, while considering the variations in fabrication process or operating conditions of such circuits and systems. First, at circuit level, we present and solve the problem of power-delay optimal design of linear pipeline utilizing soft-edge flip-flops which allow opportunistic time borrowing within the pipeline. We formulate this problem considering statistical delay models that characterize effect of process variation on gate and interconnect delays. To enable further optimization, the soft-edge flip flops are equipped with dynamic error detection (and correction) circuitry to detect and fix the errors that might arise from possible over-clocking.;Second, we propose chip level solutions to the problem of low power design in Chip Multiprocessors (CMPs). We formulate this problem in the form of minimizing total power consumption of CMP while maintaining an average system-level throughput, or maximizing total CMP throughput subject to constraints on power dissipation or die-temperatures. We then propose mathematically rigorous and robust algorithms in the form of dynamic power (and thermal) management solutions to each of these problem formulations. Our proposed algorithms are hierarchical global power management approaches that aim to minimize CMP power consumption (or maximize throughput) by applying mainly dynamic voltage and frequency scaling (DVFS) technique, task assignment and consolidation of processing cores. To tackle the inherent variation and uncertainty of manufacturing parameters and operating conditions in these problems, our solutions adopt a closed loop feedback controller. Additionally, in one problem formulation, we focus primarily on the variations and uncertainty of CMP optimization problem parameters and adopt an algorithm based on partially observable Markovian decision process (POMDP) that uses belief states to determine unobservable system parameters, and then stochastically minimize overall CMP power consumption. Overall, simulation results of our solutions demonstrate promising results for the CMP power/thermal optimization problem.