首页> 外文会议>International Conference on Industrial, Mechanical, Electrical, and Chemical Engineering >Mechanical Properties of Films from Carboxy Methyl Glucomannan and Carrageenan with Glycerol as Plasticizer
【24h】

Mechanical Properties of Films from Carboxy Methyl Glucomannan and Carrageenan with Glycerol as Plasticizer

机译:羧基甲基葡糖胺和甘油蛋白与甘油作为增塑剂的机械性能

获取原文

摘要

Edible films from carboxymethylglucomannan (CMG) and carrageenan with glycerol as plasticizers are very possible to minimize the environmental pollution. Effect of composition of solid materials and the addition of glycerol were studied. The films were made by casting method, with variation of the composition of the solid materials are 5:15; 10:10; 15:5 (w/w) for CMG and carrageenan. The influence of glycerol was studied on the amount of as 5%, 10%, and 15% (v/v) in each variation of the composition. Edible film then tested its mechanical properties, such as tensile strength, elastic modulus, and elongation test using Universal Testing Machine (UTM). The results of this study showed that the highest tensile strength and elasticity modulus of edible film were obtained from combination of 5 grams CMG and 15 grams carrageenan with 5% glycerol addition. The value of tensile strength and elasticity modulus were 25.607 MPa and 320.09 MPa, respectively. While the highest elongation was found in films made by 15% addition of glycerol., resulting in the film elongation of 17%.
机译:来自羧甲基葡糖(CMG)和甘油蛋白作为增塑剂的卡拉仑蛋白的可食用薄膜是可以最小化环境污染的。研究了固体材料的组合物和加入甘油的影响。通过铸造方法制备薄膜,具有固体材料的组成的变化是5:15; 10:10; 15:5(w / w)用于cmg和carrageenan。在组合物的每个变体中,研究了甘油的影响为5%,10%和15%(v / v)。然后使用通用试验机(UTM)测试其机械性能,例如拉伸强度,弹性模量和伸长率试验。该研究的结果表明,可食用薄膜的最高拉伸强度和弹性模量是从5克CMG和15克拉甘烷的组合获得,其中15%甘油加入。拉伸强度和弹性模量的值分别为25.607MPa和320.09MPa。虽然在15%加入甘油制备的薄膜中发现了最高的伸长率,但导致薄膜伸长为17%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号