首页> 外文会议>SAE World Congress Experience >Combustion Stratification and Dynamic Flame Tracing Analysis of Partially Premixed Combustion in a Compression Ignition Engine Fueled with Low-Octane Fuel
【24h】

Combustion Stratification and Dynamic Flame Tracing Analysis of Partially Premixed Combustion in a Compression Ignition Engine Fueled with Low-Octane Fuel

机译:用低辛烷燃料燃料压缩点火发动机部分预混燃烧的燃烧分层和动态火焰跟踪分析

获取原文

摘要

Partially premixed combustion (PPC) is a low-temperature combustion concept, which is between conventional diesel compression ignition (CI) and homogeneous charge compression ignition (HCCI). In PPC mode, the start of injection timing (SOI) is earlier than that of CI and later than that of HCCI and stratified in-cylinder fuel/air mixture can be formed to control the auto-ignition by the fuel injection timing. Gasoline fuel is beneficial for PPC mode because of its superior resistance to auto-ignition, which can enhance fuel-air charge mixing process with longer ignition delay time. The scope of this study is to investigate in-cylinder auto-ignition, combustion evolution, combustion stratification, and engine-out emissions at PPC operating mode under lean and low load engine conditions with different injection timings. Primary reference fuel PRF77, was selected as the low-octane test fuel. Fuel-tracer planar laser-induced fluorescence (PLIF) imaging and high-speed color imaging based on natural flame luminosity were performed to visualize fuel injection, spray-wall interaction, and subsequent combustion evolution. Based on the intensity of high sped combustion images, combustion stratification and dynamic flame tracing were evaluated to gain insights into the combustion evolution. Combustion stratification analysis indicated that more inhomogeneous low-temperature combustion was achieved at earlier fuel injection timings along with decreased natural flame luminosity and increased soot emission. Fuel-trapping in piston crevice zone was visualized by fuel-tracer PLIF. Fuel-trapping in squish zone and crevice zone was measured and linked to the formation of unburned hydrocarbon when stronger spray-wall interaction occurs under PPC operating mode. Injector dribbling during the late stage of combustion was found to be as an important source of soot formation through high-speed color imaging and dynamic flame tracing analysis.
机译:部分预混燃烧(PPC)为低温燃烧的概念,这是传统的柴油压缩点火(CI)和均质充量压缩点火(HCCI)之间。在PPC模式中,喷射定时的开始(SOI)是早于CI的和晚于HCCI的和分层的缸内燃料/空气混合物可以形成为控制由燃料喷射正时的自动点火。汽油燃料是因为它能够自动点火优越电阻,这可以提高燃料 - 空气充混合过程具有较长的点火延迟时间的用于PPC模式是有益的。这项研究的范围是不同的喷射正时贫和低负载发动机条件下,调查在气缸自动点火,燃烧进化,燃烧分层,和发动机排放在PPC操作模式。主要参考燃料PRF77,被选定为低辛烷值试验燃料。基于天然火焰光度燃料示踪剂平面激光诱导荧光(PLIF)成像和高速彩色成像进行可视化的燃料喷射,喷雾 - 壁相互作用,和随后的燃烧进化。基于高的强度加速燃烧的图像,分层燃烧和动态火焰跟踪评价为洞察燃烧进化。分层燃烧分析表明,更不均匀低温燃烧在较早的燃料喷射定时随着降低天然火焰亮度和增加的烟尘排放来实现的。燃料捕获在活塞缝隙区是由燃料示踪PLIF可视化。燃料捕集在挤气区和缝隙区进行测定,当较强的喷雾 - 壁相互作用下PPC操作模式发生链接到未燃烧的碳氢化合物的形成。喷射器在燃烧后期运球被发现是通过高速彩色成像和动态火焰追踪分析的烟灰形成的重要来源。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号