Analysis of dimensional accuracy of spun parts by Taguchi approach

摘要

The paper brings the results of wall thickness distribution analysis of formed part produced by CNC multi-pass conventional metal spinning. The thickness reduction was measured by optical 3D scanning method and the influence of the feed, workpiece geometry and planar anisotropy of the blank on the wall thickness reduction was studied. For experiment design, an orthogonal array L_(27)(3~(13)) was used and ANOVA (Analysis of Variance) was carried out. Based on the results it is determined that the highest reduction of wall thickness is observed in the conical part of the experimental sample. Workpiece geometry is the most important factor which influences the wall thickness variation.