首页> 外文会议>Conference on Gallium Nitride Materials and Devices >Evolution of surface morphology of polar and nonpolar GaN thin films during photoelectrochemical etching
【24h】

Evolution of surface morphology of polar and nonpolar GaN thin films during photoelectrochemical etching

机译:光电化学蚀刻期间极性非极性GaN薄膜表面形态的演变

获取原文

摘要

The surface morphologies of unintentionally doped epitaxial laterally overgrown oplane and a-plane GaN samples subjected to photoelectrochemical (PEC) etching in aqueous KOH is reported. By maintaining the etch in the carrier-limited regime, elucidation of the optically and electrically active defects can be achieved. Results correlating surface morphologies after PEC etching with TEM results verify the reduction of threading dislocations in the overgrown "wing" regions, as compared with the "windows" (seed regions) for both a- and c-plane GaN ELO samples. Also, within and near the window regions of the a-GaN ELO samples, PEC etching reveals a significant amount of basal stacking faults that propagate to the surface. This work represents a systematic evaluation of the effects of PEC etching on polar and nonpolar surfaces of the GaN layers grown by the conventional ex situ ELO method. The surface morphology and the whisker densities after PEC etching of c-plane GaN samples grown using SiN_x nanonetwork mask layers, a method referred to as in situ nano-ELO, also indicates significant improvement of the material quality. The identification of variations in surface morphology at different times during PEC etching of GaN may have utility in that the assessment of the material quality can be made and assorted nanopatterns of GaN surfaces can be intentionally achieved in a controllable, large-scale, and inexpensive manner.
机译:据报道了无意掺杂的外延横向逾越草OPLANE和在KOH水溶液中进行光电子化学(PEC)蚀刻的平面GAN样品的表面形态。通过在载流子限制的状态下保持蚀刻,可以实现光学和电活性缺陷的阐明。结果在具有TEM结果的PEC蚀刻后相关表面形态验证过度的“翼”区域中的螺纹位错,与用于A-和C平面GaN Elo样本的“窗口”(种子区域)相比。而且,在A-GaN ELO样品的窗口区域内和附近,PEC蚀刻揭示了传播到表面的大量基础堆叠故障。该工作代表了通过常规EX原位ELO方法生长的GaN层的极性和非极性表面对PEC蚀刻的影响的系统评价。使用SIN_X纳米膜掩模层生长的C平面GaN样品PEC蚀刻后的表面形态和晶须密度,该方法称为原位纳米ELO,也表明了材料质量的显着提高。在GaN的PEC蚀刻期间不同时间的表面形态的变化可能具有实用性,因为可以在可控,大规模和廉价的方式上有意实现甘露甘露盖的评估和各种纳米图案。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号