首页> 外文会议>International Workshop on Radiometric and Geometric Calibration >Validated data and removal of bias through traceability to SI units

【24h】

Validated data and removal of bias through traceability to SI units

机译：通过可追溯性对SI单位进行验证的数据和偏差

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

The paper describes recent advances in establishing primary radiometric scales and transfer standards, and their application to improving accuracy and traceability to Standard International (SI) units of Earth Observation measurements. It further discusses how to ensure that all steps in generating a data product, data collection, processing and validation, have associated with them an analysis of their uncertainty and assessment of any known biases so that end users can compare and combine reliably all levels of data product that may be derived from them. Finally, the paper concludes with options for how future accuracy and traceability can be improved significantly.

机译：本文介绍了建立主要辐射尺度和转移标准的最新进展，以及其应用于提高地球观察测量标准国际（SI）单位的准确性和可追溯性。它进一步讨论了如何确保生成数据产品，数据收集，处理和验证的所有步骤与他们相关联，这些步骤与他们分析了他们对任何已知偏差的不确定性和评估，以便最终用户可以可靠地比较和组合所有级别的数据可以源自它们的产品。最后，本文得出结论，可与未来准确性和可追溯性的选择显着提高。

著录项

来源
《International Workshop on Radiometric and Geometric Calibration 》|2004年||共12页
会议地点
作者
N.P. Fox;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类 TP73-532;
关键词
Validated data; removal of bias through traceability; SI units;

机译：验证数据;通过可追溯性去除偏差;SI单位;

相似文献

外文文献
中文文献
专利

1. Bayesian sensitivity analysis methods to evaluate bias due to misclassification and missing data using informative priors and external validation data [J] . LutaG., FordM.B., BondyM., Cancer epidemiology . 2013 ,第2期

机译：贝叶斯敏感性分析方法，可使用信息丰富的先验数据和外部验证数据评估由于分类错误和数据丢失而造成的偏差
2. Bias and Sampling Error of the Estimated Proportion of Genotypic Variance Explained by Quantitative Trait Loci Determined From Experimental Data in Maize Using Cross Validation and Validation With Independent Samples [J] . Albrecht E. Melchinger, Chris C. Sch?n, H. Friedrich Utz Genetics: A Periodical Record of Investigations Bearing on Heredity and Variation . 2000 ,第4期

机译：利用交叉验证和独立样本验证从玉米实验数据确定的数量性状位点解释的基因型变异的估计比例的偏差和抽样误差
3. Censoring Trace-Level Environmental Data: Statistical Analysis Considerations to Limit Bias [J] . Barbara Jane George, Leslie Gains-Germain, Kristin Broms, Environmental Science & Technology . 2021 ,第6期

机译：审查跟踪级别环境数据：限制偏差的统计分析考虑因素
4. Validated data and removal of bias through traceability to SI units [C] . N.P. Fox International Workshop on Radiometric and Geometric Calibration . 2004

机译：通过可追溯性对SI单位进行验证的数据和偏差
5. DEVELOPMENT OF A NONEQUILIBRIUM STAGE MODEL FOR THE DESIGN AND SIMULATION OF GAS PROCESSING UNITS AND VERIFICATION WITH PLANT DATA (REACTIVE SEPARATIONS, SELECTIVE HYDROGEN SULFIDE REMOVAL). [D] . SARDAR, HASHIM. 1985

机译：非平衡阶段模型的开发，用于气体处理装置的设计和仿真以及工厂数据的验证（分离，选择性去除硫化氢）。
6. Bayesian sensitivity analysis methods to evaluate bias due to misclassification and missing data using informative priors and external validation data [O] . George Luta, Melissa Belle Ford, Melissa Bondy, -1

机译：贝叶斯敏感性分析方法用于评估偏差由于使用信息性前锋和外部验证数据错误分类和缺失数据
7. : "This paper deals with the functionality of the flaked stone assemblages from several Neolithic sites of the NE of the Iberian Peninsula. The chronological framework ranges from the mid-6th to the mid-4th millennium cal. BCE, which corresponds to the Early and Middle Neolithic. This long period ranges from the arrival of the first farming communities in the Iberian Peninsula, around 5600-5500 cal. BCE, to 3600-3500 cal. BCE, two millennia later, when Neolithic communities had stably occupied most of the available territory, from the mountainous areas of the Pyrenees to the coastal areas of the Mediterranean.In this context, the NE of the Iberian Peninsula is one of the areas where a major number of use-wear analyses have been carried out, especially for what concerns the Neolithic period. This is mainly due to the interest shown by the directors of the excavations and by the Spanish use-wear specialists as well; both participated and cooperated in order to enlarge the number of contexts studied, making the NE of the Iberian Peninsula one of the areas of Europe with the largest number of ‘functional studies’. As a result, today we have a reliable picture of the type of lithic tools used by the first farming groups, how they were used, and which needs they were satisfying.The methodology employed for this type of analysis is today broadly shared by most use-wear specialists. A stereoscopic microscope is used together with a reflected-light microscope for the analysis of the archaeological specimens. Afterwards, the observed use-wear traces are compared with the traces from experimental tools. This study primarily made use of the tools preserved at the ‘Traceoteque’ of the Institución Milà y Fontanals of the CSIC of Barcelona.This paper presents the results obtained for the different types of analysed sites and the relative lithic assemblages. In this way, tools from different contexts are compared: open-air sites, caves and rock-shelters, pit-sites, burials, and mining sites. Such a diversity of contexts allowed for the exploration of the existence of recurrences and differences in the functionality of the lithic tools from one site to another. The results obtained have also provided information on some aspects related to the economic processes carried out at the different sites, caves, rock-shelters and open-air contexts. It has been possible to gain fresh data on the types of tasks carried out and their relative importance for each site, their relation with the geographical and environmental context and the natural resources available there. In addition, analysing tools recovered from burials – mainly individual inhumations – provided information on the relationships between the buried individuals and the working tools, in particular exploring the relationships between sex and age patterns and the types of tools deposited as goods.In conclusion, use-wear analysis allowed for the exploration of a variety of issues; from technical aspects related to the production and management of the lithic resources to social aspects related to the subsistence activities and the individuals that carried them out." [O] . Gibaja Bao, Juan Francisco, Mazzucco, Niccolo 2015

机译：：“本文研究了伊比利亚半岛东北部几个新石器时代遗址的片状石材组合的功能。时间框架从公元前6世纪中叶到4世纪中叶，分别对应于早期和早期。新石器时代中期，这段时间的长短是从伊比利亚半岛的第一个农业社区到来，大约在公元前5600-5500 cal，到了两千年后的3600-3500 BCE，当时新石器时代的社区稳定地占据了大部分可用土地。从比利牛斯山脉山区到地中海沿岸地区。在这种情况下，伊比利亚半岛东北部是进行过大量使用磨损分析的地区之一，尤其是在关注方面新石器时代，这主要是由于发掘负责人和西班牙使用服装专家表现出的浓厚兴趣；他们参与和合作以扩大孔蒂的数量xts进行了研究，使伊比利亚半岛的NE成为“功能研究”数量最多的欧洲地区之一。结果，今天我们可以可靠地了解第一批耕作小组使用的石器工具的类型，使用方法以及它们满足的需求。今天，大多数使用方法广泛共享用于这种类型的分析的方法穿专家。立体显微镜与反射光显微镜一起用于分析考古样本。然后，将观察到的使用磨损痕迹与实验工具的痕迹进行比较。这项研究主要利用了巴塞罗那CSIC的米拉·丰塔纳尔研究所的“ Traceoteque”中保存的工具。本文介绍了针对不同类型的分析地点和相对石器组合所获得的结果。通过这种方式，可以比较来自不同环境的工具：露天场所，洞穴和岩石避难所，露天场所，埋葬场所和采矿场所。如此多样的上下文允许探索重复性的存在以及从一个站点到另一个站点的石器工具的功能差异。所获得的结果还提供了与在不同地点，洞穴，避难所和露天环境中进行的经济过程有关的某些方面的信息。可以获得有关所执行任务的类型及其对每个站点的相对重要性，它们与地理和环境环境以及那里可用自然资源的关系的新数据。此外，对从墓葬中回收的工具（主要是个人遗体）进行分析，可提供有关被掩埋的个体与工作工具之间关系的信息，尤其是探索性别与年龄模式之间的关系以及作为商品存放的工具的类型。磨损分析允许探索各种问题；从与石器资源的生产和管理有关的技术方面到与自给活动及其实施者有关的社会方面。”

Validated data and removal of bias through traceability to SI units

摘要

著录项

相似文献

相关主题

期刊订阅