Summary form only given. An improved process that uses a novel thermal flow/thermal setting polymer that can planarize even the largest geometries after a reflow at 200 degrees C is described. The planarization properties of this novel polymer were determined by coating it over 1.0- mu m step heights of different widths. The step heights over the line structure before and after the polymer coating were measured using a profilometer. A 1.2- mu m thick coating was used in these studies. The planarization etch was carried out in a reactive-ion-etching system. The etch rates of SiON depended weakly on the oxygen content, while the etch rates of the new organic material are a strong function of the oxygen content. Due to local loading effects, the etch rate ratio of the polymer to the CVD dielectric film cannot be maintained at a 1:1 ratio as measured by test wafers. In fact, the ratio has to be considerably less than 1 to give a planarized surface.
展开▼