首页> 外文会议>IEEE Symposium on VLSI Technology >Metal/P-type GeSn Contacts with Specific Contact Resistivity down to 4.4×10−10 Ω-cm2
【24h】

Metal/P-type GeSn Contacts with Specific Contact Resistivity down to 4.4×10−10 Ω-cm2

机译:接触电阻率低至4.4×10 −10 Ω-cm 2 的金属/ P型GeSn触点

获取原文

摘要

Ga and Sn surface-segregated p+-GeSn (Seg. p+-GeSn) was grown by molecular beam epitaxy (MBE) to achieve an average active Ga doping concentration of 3.4×1020 cm-3 and surface Sn composition of more than 8%. This enables the realization of record-low specific contact resistivity ρc down to 4.4×10-10 Ω-cm2. The average ρc extracted from 14 sets of Ti/Seg. p+-GeSn Nano-TLM test structures, a collection of more than 90 devices is 6.5×10-10 Ω-cm2. This is also the lowest ρc for non-laser-annealed contacts. Ti contacts to p+-GeSn films with and without Ga and Sn surface segregation were fabricated. It is shown that the segregation of Ga and Sn at the Ti/p+-GeSn interface leads to 50% reduction in ρc as compared with a sample without segregation.
机译:Ga和Sn表面偏析的p + -GeSn(例如p + -GeSn)通过分子束外延(MBE)进行生长,以使平均活性Ga掺杂浓度达到3.4×10 20 厘米 -3 并且表面Sn组成超过8%。这可以实现创纪录的低比接触电阻率ρ c 降至4.4×10 -10 Ω-厘米 2 。平均ρ c 从14组Ti / Seg中提取。 p + -GeSn Nano-TLM测试结构,集合了90多个设备,为6.5×10 -10 Ω-厘米 2 。这也是最低的ρ c 用于非激光退火的触点。 Ti与p的接触 + 制备了具有和不具有Ga和Sn表面偏析的-GeSn膜。结果表明,Ga和Sn在Ti / p处的偏析 + -GeSn界面可将ρ降低50% c 与没有偏析的样品相比。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号