首页> 外文会议>IEEE International Workshop on Measurements and Networking >Radio frequency measurements on a SBX daughter board using GNU radio and USRP N-210
【24h】

Radio frequency measurements on a SBX daughter board using GNU radio and USRP N-210

机译:使用GNU Radio和USRP N-210在SBX子板上的射频测量

获取原文

摘要

In this paper we report Radio Frequency (RF) measurements performed on a GNU Radio/Universal Software Radio Peripheral (USRP) testbed. The USRP hardware is connected to SBX daughter board, both designed by Ettus Research. We can confirm the bandwidth stated by the designer, nonetheless the output power was found to be constantly decreasing with increasing the output frequency. USRP Hardware Driver (UHD) gain is a supplementary amplification parameter available to the user, nonetheless its manipulation has to be done with care. For the lower part of the SBX frequency band (400-1500 MHz), simply increasing the UHD gain above some value has the effect to increase the Total Harmonic Distortion (THD) without any increase in the desired carrier frequency power but with a significant increase in the out-of-band emission.
机译:在本文中,我们报告在GNU无线电/通用软件无线电外围设备(USRP)上进行的射频(RF)测量。 USRP硬件连接到SBX子板,由ETTUS Research设计。我们可以确认设计人员所述的带宽,仍然发现输出功率随着输出频率的增加而不断下降。 USRP硬件驱动程序(UHD)增益是用户可用的补充放大参数,仍然必须小心进行其操作。对于SBX频带(400-1500MHz)的下部,简单地增加UHD增益超过一些值的效果,其效果增加了总谐波失真(THD)而无需增加所需的载波频率功率,而是显着增加在带外发射。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号