首页> 外文会议>IEEE International Conference on Robotics and Biomimetics >Drop test for evaluating effect of cushioning material and servo gain on parachute landing impact using a small one-legged robot
【24h】

Drop test for evaluating effect of cushioning material and servo gain on parachute landing impact using a small one-legged robot

机译:使用小型单腿机器人进行跌落测试,以评估缓冲材料和伺服增益对降落伞着陆的影响

获取原文

摘要

To drop a humanoid robot with a parachute from an airplane is one of the promising ways of delivering robots to a disaster site, and this research has focused on how to absorb parachute landing shock. Two large impacts were observed in one drop test using a small one-legged robot in our previous experiment. The second peak could be reduced by the shock absorbing motion, but the first peak did not change dramatically even if the landing posture was changed. Therefore, this paper forces on how to reduce the first impact acceleration and discusses on effect of cushioning material and servo gain on the impact. It was found that the difference in the hardness of the cushioning material greatly influences the impact acceleration. There was a difference in impact acceleration more than twice between a soft cushion and a hard cushion. On the other hand, impact absorption effect by change of servo gain of robot's actuators was minor. Therefore, it is concluded that flexibility with hardware is also necessary for joints.
机译:将具有降落伞的人形机器人从飞机上掉下来是将机器人运送到灾难现场的有前途的方法之一,这项研究集中在如何吸收降落伞的降落冲击上。在我们先前的实验中,使用小型单腿机器人在一次跌落测试中观察到了两个重大影响。可以通过减震运动来减小第二个峰值,但是即使改变着陆姿势,第一个峰值也不会发生显着变化。因此,本文着重介绍如何降低第一冲击加速度,并讨论缓冲材料和伺服增益对冲击的影响。已经发现,缓冲材料的硬度差异极大地影响了冲击加速度。软垫和硬垫之间的冲击加速度差异超过两倍。另一方面,通过改变机器人致动器的伺服增益来吸收冲击的效果很小。因此,可以得出结论,对于接头来说,硬件的灵活性也是必需的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号