首页> 外文会议>Metrology, Inspection, and Process Control for Microlithography XVI >Sensitivity of the Silicon Layer Thickness in SOI process in the UV Regime
【24h】

Sensitivity of the Silicon Layer Thickness in SOI process in the UV Regime

机译:紫外线条件下SOI工艺中硅层厚度的灵敏度

获取原文

摘要

In measuring films deposited on SOI structures, it was found that both spectroscopic ellipsometer (SE) and reflectance data are insensitive to the Si and O thickness in the UV regime. This can be attributed to the high absorption of the silicon film in this wavelength range. In this regime, both reflectance and SE are sensitive only to layers above Si, and to the optical constants of the Si film. The full thickness information concerning the SOI structure itself is contained in the visible region of the spectrum. In the current work, several SOI structures, with and without surface oxide films, were analyzed and are discussed. The thickness of the layer above the silicon layer varied between 1.1 nm to 700 nm. These thicknesses were obtained by modeling the reflectance and ellipsometric data in the UV-regime.
机译:在测量沉积在SOI结构上的膜时,发现椭圆偏振光谱仪(SE)和反射率数据对UV态下的Si和O厚度均不敏感。这可以归因于在该波长范围内硅膜的高吸收。在这种情况下,反射率和SE都仅对Si上方的层以及Si膜的光学常数敏感。有关SOI结构本身的完整厚度信息包含在光谱的可见区域中。在当前的工作中,分析和讨论了几种带有和不带有表面氧化膜的SOI结构。硅层上方的层的厚度在1.1nm至700nm之间变化。这些厚度是通过对UV区域中的反射率和椭偏数据建模而获得的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号