Abstract: In many industrial branches a continuous scaling down of parts and products is observed. For example in the fields of micro-mechanics new sensors and actuators can be produced which offer the possibility of making self acting micro- systems. Other micro-components for medicine, chemistry or optics allow minimal invasive surgery and inspection. In every case conventional fabrication technologies such as turning and milling have to be carefully investigated: their appropriateness for the production of micro-parts is not always guaranteed. On the other hand new technologies such as the LIGA-process (German acronym for lithography, galvano forming and plastic molding process) open new ways to inexpensive mass-production. The following paper describes the potential of DUV-lasers (laser wavelength: lambda equals 200 - 280 nm) for micro-machining specific applications. Using excimer-lasers the machining of ceramics, glass and polymer materials is presented. The excellent beam properties of a self developed quadrupled Nd:YAG-laser are used for the repair of photolithographic masks. The mask repair using ablation and deposition of chromium on glass substrate is described. !15
展开▼