首页> 外文会议>Royal Microscopical Society conference on microcopy of semiconducting materials >Controlling misfit dislocation generation in strained layer epitaxy by point defect injection
【24h】

Controlling misfit dislocation generation in strained layer epitaxy by point defect injection

机译:通过点缺陷注入控制应变层外延失配位错的产生

获取原文

摘要

A detailed study on the evolution of dislocations has been conducted on Ge_xSi_(1-x)/Si heterostructures during rapid thermal anneals (RTA) of 540 keV self-irradiated Si versus s-grown samples. The implant fluence of 2 x 10~(14) ions/cm~2 and a substrate temperature of 25 deg C were used for these experiments. Nomarski interference microscopy has been used to quantitatively examine the behaviour of misfit dislocation generation. Dislocation densities were reduced by as much as an order of magnitude in the implanted samples relative to the as-grown material. Secondly, nucleation rates were reduced significantly following implantation. These results have been interpreted in terms of a point defect-controlled misfit dislocation nucleation mechanism.
机译:对540 keV自辐照的硅与s生长的样品进行快速热退火(RTA)期间,对Ge_xSi_(1-x)/ Si异质结构进行了详细的位错演化研究。这些实验使用2 x 10〜(14)离子/ cm〜2的注入通量和25摄氏度的衬底温度。 Nomarski干涉显微镜已用于定量检查错位错位产生的行为。相对于所生长的材料,植入样品中的位错密度降低了一个数量级。其次,植入后成核率显着降低。这些结果已根据点缺陷控制的失配位错成核机制进行了解释。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号