【24h】

Study on failure of PSS caused by instability of close mode shapes

机译:闭模形状不稳定性引起的PSS失效研究

获取原文

摘要

Low frequency oscillation has been a serious threat to the security and stability of power system operation today. PSS is an effective damping controller to inhibit low frequency oscillation and has been widely used in power system. Location installation of PSS is mostly determined by the participation factors which can be calculated by right eigenvectors (lower frequency oscillation mode shapes) and left eigenvectors. However, in an n-machine system, there are n-1 low frequency oscillation modes whose frequencies are distributed in a small range of 0.2–3.0Hz, which leads close mode may occur. Study has shown that close mode shapes are sensitive to system structural parameters, that is, a small change of structural parameters may lead a big change of close mode shapes. This paper first theoretically analyze the failure of PSS led by the instability of close mode shapes, then New England 10-machine system is employed to validate the conclusion.
机译:如今,低频振荡已严重威胁着电力系统运行的安全性和稳定性。 PSS是抑制低频振荡的有效阻尼控制器,已广泛应用于电力系统。 PSS的位置安装主要由参与因子决定,参与因子可以通过右特征向量(低频振荡模式形状)和左特征向量来计算。但是,在n机器系统中,存在n-1个低频振荡模式,其频率分布在0.2-3.0Hz的小范围内,这可能导致闭合模式。研究表明,闭合模式形状对系统结构参数敏感,也就是说,结构参数的较小变化可能会导致闭合模式形状发生较大变化。本文首先从理论上分析了由于闭模形状的不稳定性所导致的PSS失效,然后采用了New England 10机系统对这一结论进行了验证。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号