首页> 外文会议>Electronics Packaging Technology Conference, 2009. EPTC '09 >Effect of bonding and aging temperatures on bond strengths of Cu with 75Sn25In solders
【24h】

Effect of bonding and aging temperatures on bond strengths of Cu with 75Sn25In solders

机译:结合和时效温度对75Sn25铜在士兵中结合强度的影响

获取原文

摘要

In the present study, the interaction between thin film Cu and non-eutectic Sn-In is studied. The effects of the bonding and aging temperature on microstructure, IMC formation and also shear strength are investigated by SEM/EDX, XRD and shear testing. The bonding mechanism is proposed based on the obtained results. The bonding mechanism is proposed to occur over 2 stages: (1) An increase in bonding temperatures leads to an increase in the true contact area, and (2) The aging temperature leads to interdiffusion and assists formation of the IMC. The type of IMC that forms is ¿ phase (Cu6(Sn, In)5) which is similar to the interaction between Cu and eutectic Sn-In. The shear strength increases with increasing the bonding temperature. On the other hand, the aging temperature does not have a significant impact on the shear strength. This indicates that the shear strength is mostly affected by the true contact area rather than the IMC formation.
机译:在本研究中,研究了薄膜Cu和非共晶Sn-In之间的相互作用。通过SEM / EDX,XRD和剪切试验研究了粘结和时效温度对显微组织,IMC形成以及剪切强度的影响。基于获得的结果,提出了结合机理。提议的粘合机制分两个阶段进行:(1)粘合温度的升高导致实际接触面积的增加,(2)时效温度导致相互扩散并有助于IMC的形成。形成的IMC的类型是β相(Cu 6 (Sn,In) 5 ),类似于Cu与共晶Sn-In之间的相互作用。剪切强度随着粘结温度的升高而增加。另一方面,时效温度对剪切强度没有显着影响。这表明抗剪强度主要受实际接触面积的影响,而不是受IMC形成的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号