首页> 外文会议>Mechanical stress evaluation by neutrons and synchrotron radiation >Applied Stress On Silicon Perfect Single Crystal For Controlling The Extinction Layer
【24h】

Applied Stress On Silicon Perfect Single Crystal For Controlling The Extinction Layer

机译:在控制消光层的硅完美单晶上施加应力

获取原文
获取原文并翻译 | 示例

摘要

The extinct layer of Si(311) perfect single crystal has been investigated by neutron diffraction method with the residual stress diffractometer DN1-M installed at the experimental hall of Indonesian multipurpose reactor RSG-GAS, in Serpong, which provides micro beam and point detector arrangement. A Si(311) perfect single crystal with thickness of 5mm was used in this experiment. The crystal was finely polished at one side and roughly polished at the opposite one. It was measured that diffracted beam from the finely polished side shows very low intensity with narrow peak profile, while for the roughly polished surface, shows stronger and broaden peak. The diffraction layer of rough surface was determined to be 0.36mm, while the smooth one was 0.28mm. It was also found that in the direction of crystal thickness in between layers no diffraction peak was detected. By these experiments it was confirmed that the applied stress on Si(311) perfect single crystal produced thicker diffraction layer. This technique is one that can be used in order to enhance the total diffracted neutron, which is desired to produce a good monochromator system.
机译:通过中子衍射法研究了Si(311)完美单晶的灭绝层,其残余应力衍射仪DN1-M安装在印尼Serpong的印度尼西亚多用途反应堆RSG-GAS实验厅中,提供微束和点检测器布置。在该实验中使用厚度为5mm的Si(311)完美单晶。晶体在一侧进行了精细抛光,而在另一侧进行了粗略抛光。据测量,来自精细抛光面的衍射光束显示出非常低的强度,具有窄的峰轮廓,而对于粗糙抛光的表面,显示出更强且更宽的峰。粗糙表面的衍射层确定为0.36mm,而光滑表面的衍射层确定为0.28mm。还发现在层之间的晶体厚度方向上未检测到衍射峰。通过这些实验,证实了在Si(311)完美单晶上施加的应力产生了较厚的衍射层。该技术是可以用来增强总衍射中子的技术,希望产生良好的单色仪系统。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号