Voltage and frequency control of self-excited slip-ring induction generators

摘要

By varying the effective rotor resistance of a self-excited slip-ring induction generator (SESRIG), the magnitude and frequency of the output voltage can be controlled over a wide speed range. A steady-state analysis based on a normalized equivalent circuit enables the control characteristics to be deduced. For a given stator load impedance, both the frequency and the voltage can be maintained constant as the speed is varied, without changing the excitation capacitance. When the stator load is variable, simultaneous voltage and frequency control requires the excitation capacitance to be changed as the rotor resistance is varied. Experiments performed on a 1.8-kW laboratory machine confirm the feasibility of the method of control. Practical implementation of a closed-loop control scheme for an SESRIG using chopper-controlled rotor resistance is also discussed. With a properly tuned proportional-plus-integral (PI) controller, satisfactory dynamic performance of the SESRIG is obtained. The proposed scheme may be used in a low-cost variable-speed wind energy system for providing good-quality electric power to remote regions.