Windows reduce heat loss and heat gain by resisting conduction, convection, and radiation using thermal breaks, low-emissivity films, and window gaps. Contrary to advancing these resistive qualities, this research introduced a highly conductive gap medium using Al2O3 nanoparticles dispersed in deionized water to enhance thermal conductivity. The solution harnessed the photothermal properties of Al2O3 nanofluids to trap, store, and transport thermally charged fluids to heat exchangers to preheat air and water, and to generate electricity forming a transparent generator—the Nanowindow.Seven Nanowindow prototypes with varying orders of air and fluid columns were fabricated and tested using distilled water (H2Owindows) to establish a baseline of performance. A solar simulator was built to avoid environmental radiant flux irregularities providing a uniform test condition averaging 750–850 W/m2, and resulted in an undefined spectral match, Class B spatial uniformity, and Class B temporal stability. All Nanowindows were tested in a calibrated hot box determined to have a ±4% degree of accuracy based on four laboratory samples establishing a framework to conduct U-factor and solar heat gain coefficient (SHGC) measurements. Four heat exchange experiments and standardized window performance metrics (U-factor, SHGC, and visible transmission) where conducted on seven H2Owindows. The top two H2Owindows were then tested using Al2O3 nanofluids. The highest performing Nanowindow improved total convective heat transfer rates using Al2O3 by 90% over water baseline, and 61% improvement in preheat water experiments. Nanowindows coupled with thermoelectric generators generated a rated voltage of 0.31VDC/0.075ADC per 12in2 Nanowindow, an improvement of 38% over baseline. Standardized window performance metrics confirmed Nanowindow U-factors ranging from 0.23 to 0.54, SHGC from 0.43 to 0.67, and visible transmittance coefficient (VT) ranging from 0.27 to 0.38. The concept of nature as model system thinking provided a theoretical framework for the research and proof of concept experiment. Ultimately, the experiment shifted window gaps from resisting energy to harnessing solar energy. The Nanowindow thus presents a unique opportunity to turn vast glass facades into transparent generators to offset energy demand, and reduce greenhouse gases.
展开▼
机译:窗户通过使用热断裂,低辐射率薄膜和窗户间隙来抵抗传导,对流和辐射,从而减少了热量损失和热量获取。与提高这些电阻质量相反,这项研究引入了一种高导电间隙介质,该介质使用分散在去离子水中的Al2O3纳米颗粒来增强导热性。该解决方案利用Al2O3纳米流体的光热特性将带热流体捕获,存储和运输到热交换器中,以预热空气和水,并通过透明的发电机Nanowindow发电。七个Nanowindow原型具有不同数量的空气和流体使用蒸馏水(H2Owindows)制备色谱柱并进行测试,以建立性能基准。为了避免环境辐射通量的不均匀性,提供了一个太阳能模拟器,该不均匀性提供了平均750–850 W / m2的均匀测试条件,并导致了不确定的光谱匹配,B级空间均匀性和B级时间稳定性。所有纳米窗口均在经过校准的热箱中进行测试,该热箱基于四个实验室样本确定了±4%的准确度,建立了进行U因子和太阳热增益系数(SHGC)测量的框架。在七个H2O窗户上进行了四个热交换实验和标准化的窗户性能指标(U因子,SHGC和可见光透射)。然后使用Al2O3纳米流体对前两个H2Owindows进行测试。最高性能的Nanowindow使用Al2O3的总对流换热率比水基线提高了90%,而预热水实验则提高了61%。纳米窗与热电发生器耦合,每12英寸2纳米窗产生的额定电压为0.31VDC / 0.075ADC,比基线提高了38%。标准化的窗口性能指标证实了Nanowindow U因子在0.23至0.54之间,SHGC在0.43至0.67之间,可见光透射系数(VT)在0.27至0.38之间。作为模型系统思维的自然概念为概念研究的研究和证明提供了理论框架。最终,实验将窗口间隙从抵抗能量转移到了利用太阳能。因此,Nanowindow提供了一个独特的机会,可以将巨大的玻璃幕墙变成透明的发电机,以抵消能源需求并减少温室气体。
展开▼