首页> 外文OA文献 >Analysis of Magnetic Nozzles For Space Plasma Thrusters = Análisis de Toberas Magnéticas para Motores Espaciales de Plasma
【2h】

Analysis of Magnetic Nozzles For Space Plasma Thrusters = Análisis de Toberas Magnéticas para Motores Espaciales de Plasma

机译:用于等离子推进器的电磁喷嘴的分析=用于等离子航天器的电磁喷嘴的分析

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Esta tesis presenta un análisis teórico del funcionamiento de toberas magnéticas para la propulsión espacial por plasmas. El estudio está basado en un modelo tridimensional y bi-fluido de la expansión supersónica de un plasma caliente en un campo magnético divergente. El modelo básico es ampliado progresivamente con la inclusión de términos convectivos dominantes de electrones, el campo magnético inducido por el plasma, poblaciones electrónicas múltiples a distintas temperaturas, y la capacidad de integrar el flujo en la región de expansión lejana. La respuesta hiperbólica del plasma es integrada con alta precisión y eficiencia haciendo uso del método de las líneas características. Se realiza una caracterización paramétrica de la expansión 2D del plasma en términos del grado de magnetización de iones, la geometría del campo magnético, y el perfil inicial del plasma. Se investigan los mecanismos de aceleración, mostrando que el campo ambipolar convierte la energía interna de electrones en energía dirigida de iones. Las corrientes diamagnéticas de Hall, que pueden hallarse distribuidas en el volumen del plasma o localizadas en una delgada capa de corriente en el borde del chorro, son esenciales para la operación de la tobera, ya que la fuerza magnética repulsiva sobre ellas es la encargada de confinar radialmente y acelerar axialmente el plasma. El empuje magnético es la reacción a esta fuerza sobre el motor. La respuesta del plasma muestra la separación gradual hacia adentro de los tubos de iones respecto de los magnéticos, lo cual produce la formación de corrientes eléctricas longitudinales y pone el plasma en rotación. La ganancia de empuje obtenida y las pérdidas radiales de la pluma de plasma se evalúan en función de los parámetros de diseño. Se analiza en detalle la separación magnética del plasma aguas abajo respecto a las líneas magnéticas (cerradas sobre sí mismas), necesaria para la aplicación de la tobera magnética a fines propulsivos. Se demuestra que tres teorías existentes sobre separación, que se fundamentan en la resistividad del plasma, la inercia de electrones, y el campo magnético que induce el plasma, son inadecuadas para la tobera magnética propulsiva, ya que producen separación hacia afuera en lugar de hacia adentro, aumentando la divergencia de la pluma. En su lugar, se muestra que la separación del plasma tiene lugar gracias a la inercia de iones y la desmagnetización gradual del plasma que tiene lugar aguas abajo, que permiten la separación ilimitada del flujo de iones respecto a las líneas de campo en condiciones muy generales. Se evalúa la cantidad de plasma que permanece unida al campo magnético y retorna hacia el motor a lo largo de las líneas cerradas de campo, mostrando que es marginal. Se muestra cómo el campo magnético inducido por el plasma incrementa la divergencia de la tobera magnética y por ende de la pluma de plasma en el caso propulsivo, contrariamente a las predicciones existentes. Se muestra también cómo el inducido favorece la desmagnetización del núcleo del chorro, acelerando la separación magnética. La hipótesis de ambipolaridad de corriente local, común a varios modelos de tobera magnética existentes, es discutida críticamente, mostrando que es inadecuada para el estudio de la separación de plasma. Una inconsistencia grave en la derivación matemática de uno de los modelos más aceptados es señalada y comentada. Incluyendo una especie adicional de electrones supratérmicos en el modelo, se estudia la formación y geometría de dobles capas eléctricas en el interior del plasma. Cuando dicha capa se forma, su curvatura aumenta cuanto más periféricamente se inyecten los electrones supratérmicos, cuanto menor sea el campo magnético, y cuanto más divergente sea la tobera magnética. El plasma con dos temperaturas electrónicas posee un mayor ratio de empuje magnético frente a total. A pesar de ello, no se encuentra ninguna ventaja propulsiva de las dobles capas, reforzando las críticas existentes frente a las propuestas de estas formaciones como un mecanismo de empuje. Por último, se presenta una formulación general de modelos autosemejantes de la expansión 2D de una pluma no magnetizada en el vacío. El error asociado a la hipótesis de autosemejanza es calculado, mostrando que es pequeño para plumas hipersónicas. Tres modelos de la literatura son particularizados a partir de la formulación general y comparados. Abstract This Thesis presents a theoretical analysis of the operation of magnetic nozzles for plasma space propulsion. The study is based on a two-dimensional, two-fluid model of the supersonic expansion of a hot plasma in a divergent magnetic field. The basic model is extended progressively to include the dominant electron convective terms, the plasma-induced magnetic field, multi-temperature electron populations, and the capability to integrate the plasma flow in the far expansion region. The hyperbolic plasma response is integrated accurately and efficiently with the method of the characteristic lines. The 2D plasma expansion is characterized parametrically in terms of the ion magnetization strength, the magnetic field geometry, and the initial plasma profile. Acceleration mechanisms are investigated, showing that the ambipolar electric field converts the internal electron energy into directed ion energy. The diamagnetic electron Hall current, which can be distributed in the plasma volume or localized in a thin current sheet at the jet edge, is shown to be central for the operation of the magnetic nozzle. The repelling magnetic force on this current is responsible for the radial confinement and axial acceleration of the plasma, and magnetic thrust is the reaction to this force on the magnetic coils of the thruster. The plasma response exhibits a gradual inward separation of the ion streamtubes from the magnetic streamtubes, which focuses the jet about the nozzle axis, gives rise to the formation of longitudinal currents and sets the plasma into rotation. The obtained thrust gain in the magnetic nozzle and radial plasma losses are evaluated as a function of the design parameters. The downstream plasma detachment from the closed magnetic field lines, required for the propulsive application of the magnetic nozzle, is investigated in detail. Three prevailing detachment theories for magnetic nozzles, relying on plasma resistivity, electron inertia, and the plasma-induced magnetic field, are shown to be inadequate for the propulsive magnetic nozzle, as these mechanisms detach the plume outward, increasing its divergence, rather than focusing it as desired. Instead, plasma detachment is shown to occur essentially due to ion inertia and the gradual demagnetization that takes place downstream, which enable the unbounded inward ion separation from the magnetic lines beyond the turning point of the outermost plasma streamline under rather general conditions. The plasma fraction that remains attached to the field and turns around along the magnetic field back to the thruster is evaluated and shown to be marginal. The plasmainduced magnetic field is shown to increase the divergence of the nozzle and the resulting plasma plume in the propulsive case, and to enhance the demagnetization of the central part of the plasma jet, contrary to existing predictions. The increased demagnetization favors the earlier ion inward separation from the magnetic field. The local current ambipolarity assumption, common to many existing magnetic nozzle models, is critically discussed, showing that it is unsuitable for the study of plasma detachment. A grave mathematical inconsistency in a well-accepted model, related to the acceptance of this assumption, is found out and commented on. The formation and 2D shape of electric double layers in the plasma expansion is studied with the inclusion of an additional suprathermal electron population in the model. When a double layer forms, its curvature is shown to increase the more peripherally suprathermal electrons are injected, the lower the magnetic field strength, and the more divergent the magnetic nozzle is. The twoelectron- temperature plasma is seen to have a greater magnetic-to-total thrust ratio. Notwithstanding, no propulsive advantage of the double layer is found, supporting and reinforcing previous critiques to their proposal as a thrust mechanism. Finally, a general framework of self-similar models of a 2D unmagnetized plasma plume expansion into vacuum is presented and discussed. The error associated with the self-similarity assumption is calculated and shown to be small for hypersonic plasma plumes. Three models of the literature are recovered as particularizations from the general framework and compared.
机译:本文对用于等离子体空间推进的电磁喷嘴的工作原理进行了理论分析。该研究基于发散磁场中热等离子体超音速膨胀的双流体三维模型。基本模型通过包含电子占主导地位的对流项,等离子体感应磁场,不同温度下的多个电子种群以及将通量积分到远扩展区域的能力而逐步扩展。等离子体的双曲线响应使用特征线方法进行了高精度和高效率的集成。根据离子磁化程度,磁场的几何形状以及等离子体的初始轮廓,对等离子体的2D膨胀进行参数化表征。研究了加速机理,表明双极场将电子的内能转换为离子的有向能。霍尔的反磁电流可以分布在等离子体中或位于射流边缘的薄层电流中,这对于喷嘴的操作至关重要,因为它们上的排斥磁力负责径向限制并轴向加速等离子体。电磁推力是对该力施加在电动机上的反作用力。等离子体的响应表明离子管与磁性管逐渐向内分离,这导致形成纵向电流并使等离子体旋转。根据设计参数评估获得的等离子笔的推力增益和径向损耗。详细分析了磁力线下游(自封闭的)等离子体的磁力分离,这对于将电磁喷嘴用于推进目的是必需的。基于等离子电阻率,电子惯性和等离子感应磁场的三种现有分离理论显示不足以用于推进式磁性喷嘴,因为它们产生的是向外分离,而不是向外分离。内部,增加了笔的散度。取而代之的是,由于离子的惯性和在下游发生的等离子体逐渐消磁,因此表明发生了等离子体分离,这允许在非常一般的条件下将离子通量与磁力线无限分离。评估了仍然附着在磁场上并沿着闭合磁场线返回到电动机的等离子量,表明它是微不足道的。与现有的预测相反,示出了在推进情况下等离子体感应的磁场如何增加磁喷嘴的发散,并因此增加等离子体笔的发散。它还显示了电枢如何促进射流铁芯的消磁,从而加速了磁分离。严格讨论了几种现有的磁性喷嘴模型所共有的局部电流双极性假设,这表明该方法不足以用于等离子体分离的研究。指出并评论了最公认的模型之一的数学推导中的严重不一致。通过在模型中包括其他种类的超吸热电子,研究了等离子体内部双电层的形成和几何形状。当形成这样的层时,其曲率越大,越注入越热的电子,磁场越小,并且磁性喷嘴越发散。具有两个电子温度的等离子体具有更高的磁推力与总推力之比。尽管如此,没有发现双层的推进优势,从而加剧了对这些形式作为推动机制的提议的批评。最后,提出了真空非磁化笔的二维扩展的自相似模型的一般公式。计算了与自相似假设相关的误差,这表明高超声速羽毛的误差很小。从一般表述中具体化了三种文献模型并进行了比较。摘要本文对用于等离子体空间推进的电磁喷嘴的工作原理进行了理论分析。该研究基于发散磁场中热等离子体超音速膨胀的二维,双流体模型。基本模型逐步扩展,以包括主要的电子对流项,等离子体感应磁场,多温度电子种群以及在远扩展区域整合等离子体流的能力。使用特征线的方法可以准确有效地集成双曲线等离子体响应。 2D等离子体膨胀在参数上根据离子磁化强度,磁场几何形状和初始等离子体轮廓进行表征。研究了加速机理,表明双极性电场将内部电子能量转换为有向离子能量。在电磁喷嘴的操作中,可以将反磁性电子霍尔电流集中在中心,该霍尔电流可以分布在等离子体体积中,也可以位于喷射边缘处的薄电流片中。对该电流的排斥磁力负责等离子体的径向限制和轴向加速度,而磁力推力是对该力在推进器的电磁线圈上的反应。等离子体响应显示离子流管与磁性流管之间逐渐向内分离,这使射流围绕喷嘴轴聚焦,形成纵向电流,并使等离子体旋转。根据设计参数评估在磁性喷嘴中获得的推力增益和径向等离子体损失。详细研究了电磁喷嘴推进应用所需的从封闭磁场线向下游的等离子体分离。依靠等离子电阻率,电子惯性和等离子感应的磁场,显示了三种流行的电磁喷嘴分离理论,这些理论不足以适用于推进式磁性喷嘴,因为这些机制将羽流向外分离,增加了羽流的发散而不是集中根据需要。取而代之的是,等离子脱离主要是由于离子惯性和下游发生的逐渐消磁而发生的,这使得在相当普遍的条件下,离子能从磁力线无限制地向内分离,超出最外层等离子流线的拐点。仍然附着在磁场上并沿着磁场转回到推进器的血浆部分被评估为边缘。与现有的预测相反,在推进情况下,等离子体感应的磁场显示出增加了喷嘴的发散和由此产生的等离子体羽流,并增强了等离子体射流中心部分的消磁。退磁增加,有利于离子从磁场中较早地向内分离。严格讨论了许多现有的磁性喷嘴模型所共有的局部电流双极性假设,这表明它不适用于等离子体分离的研究。发现并评论了在公认模型中与接受该假设有关的严重数学不一致之处。研究了等离子体膨胀中双电层的形成和二维形状,并在模型中包含了额外的超热电子种群。当形成双层时,显示出其曲率增加,越多的周边超热电子被注入,磁场强度越低,并且磁喷嘴发散性越大。可以看到,双电子温度等离子体具有更大的磁推力比与总推力比。尽管如此,没有发现双层的推进优势,支持和加强了先前对其推论的提议的批评。最后,提出并讨论了二维未磁化等离子体羽流向真空扩展的自相似模型的一般框架。计算出与自相似假设有关的误差,对于高超声速等离子体羽流来说,该误差很小。从一般框架中提取了三种文献模型作为具体化并进行了比较。

著录项

  • 作者

    Merino Martínez Mario;

  • 作者单位
  • 年度 2013
  • 总页数
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号