This work results on a finding: the heat loss from rotary kiln represents a significant energy amount during materials processing in civil engineering domain. Motivated by traditional energy recovery methods from heat exchanger, this thesis is aimed at providing their rigorous thermodynamic diagnostics. Firstly, a thermal-granular model is developed, and then validated in asphalt plant whose the rotary kiln is composed of flights to ensure the materials mixing. Their cross-section distribution is calculated from a granular discharge law. The numerical experiments showed an increase of heat transfer phenomena between gases and solids, and those between the solids and the wall, this latter phenomenon limiting the process performances. Heat recovery exchanger applied to the rotary kiln is studied from a semi-industrial pilot based on a rotor stator configuration including a tangential inlet. Developing a Taylor-Couette-Poiseuille flow, the heat transfer results are undoubted in the range of the studied Reynolds numbers: the axial motion contribution is larger than the rotational turbulent motion. A dimension less criterion is proposed in order to be applied to the aforementioned integrated model including the heat exchanger applied to the rotary kiln, its effect being assessed upon the internal thermalprofiles. Finally, the vortices flow structure within the annular gap exchanger is studied from Large Eddy simulation. The amplitude and frequency passage of the contrarotatives cells located in the turbulent boundary layer are connected to the process parameters (the axial flowrate and the kiln shell rotation).
展开▼
