The aim of this paper is to investigate the influence of physico-chemical parameters on liquid–liquid dispersion at high dispersed phase concentration in Sulzer SMV™ mixer. Four different oil-in-water systems involving two different surfactants are used in order to evaluate the effect of interfacial tension, densities and viscosities ratio on mean droplets size diameters. Moreover the influence of the dispersed phase concentration on the pressure drop as well as on the droplet size distribution is investigated. Two different droplets size distribution analysis techniques are used in order to compare the resulting Sauter mean diameters. The comparison between residence time in the mixer and surfactants adsorption kinetics leads to take into account the evolution of the interfacial tension between both phases at short times. Finally experimental results are correlated as a function of dimensionless Reynolds and Weber numbers.udud
展开▼
机译:本文的目的是研究在Sulzer SMV™混合器中高分散相浓度下,理化参数对液-液分散的影响。为了评估界面张力,密度和粘度比对平均液滴尺寸直径的影响,使用了包含两种不同表面活性剂的四种不同的水包油系统。此外,研究了分散相浓度对压降以及液滴尺寸分布的影响。为了比较所得的Sauter平均直径,使用了两种不同的液滴尺寸分布分析技术。在混合器中的停留时间与表面活性剂的吸附动力学之间的比较导致考虑了在短时间内两相之间的界面张力的变化。最后,将实验结果与无因次雷诺数和韦伯数相关联。 ud ud
展开▼