首页> 外文OA文献 >Martian low-temperature alteration materials in shock-melt pockets in Tissint: Constraints on their preservation in shergottite meteorites
【2h】

Martian low-temperature alteration materials in shock-melt pockets in Tissint: Constraints on their preservation in shergottite meteorites

机译:Tissint的熔体融化口袋中的火星低温蚀变材料:限制其在钙锰矿陨石中的保存

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

We apply an array of in situ analytical techniques, including electron and Raman microscopy, electron and ion probe microanalysis, and laser ablation mass spectrometry to the Tissint martian meteorite in order to find and elucidate a geochemical signature characteristic of low-temperature alteration at or near the martian surface. Tissint contains abundant shock-produced quench-crystallized melt pockets containing water in concentrations ranging from 73 to 1730 ppm; water content is positively correlated with Cl content. The isotopic composition of hydrogen in the shock-produced glass ranges from δD = 2559 to 4422 ‰. Water is derived from two distinct hydrogen reservoirs: the martian near-surface (>500 ‰) and the martian mantle (-100 ‰). In one shock melt pocket comprising texturally homogeneous vesiculated glass, the concentration of H in the shock melt decreases while simultaneously becoming enriched in D, attributable to the preferential loss of H over D to the vesicle while the pocket was still molten. While igneous sulfides are pyrrhotite in composition (Fe_(0.88-0.90)S), the iron to sulfur ratios of spherules in shock melt pockets are elevated, up to Fe_(1.70)S, which we attribute to shock-oxidation of igneous pyrrhotite and the formation of hematite at high temperature. The D- and Cl-enrichment, and higher oxidation of the pockets (as indicated by hematite) support a scenario in which alteration products formed within fractures or void spaces within the rock; the signature of these alteration products is preserved within shock melt (now glass) which formed upon collapse of these fractures and voids during impact shock. Thermal modeling of Tissint shock melt pockets using the HEAT program demonstrates that the shock melt pockets with the greatest potential to preserve a signature of aqueous alteration are small, isolated from other regions of shock melt, vesicle-free, and glassy.
机译:我们对Tissint火星陨石应用了一系列原位分析技术,包括电子和拉曼显微镜,电子和离子探针显微分析以及激光烧蚀质谱,以发现和阐明在或附近的低温蚀变的地球化学特征。火星表面。 Tissint含有大量震荡产生的淬火结晶熔体腔,其中的水浓度范围为73至1730 ppm;水分含量与氯含量呈正相关。产生冲击的玻璃中氢的同位素组成为δD= 2559至4422‰。水来自两个不同的氢储层:火星近地表(> 500‰)和火星地幔(-100‰)。在一个包括质地均匀的小孔玻璃的冲击熔体袋中,冲击熔体中的H浓度降低而同时又富集了D,这是由于在袋仍处于熔融状态时,H优先于D失去了D。当火成硫化物在成分(Fe_(0.88-0.90)S)中是黄铁矿时,冲击熔池中球体的铁硫比提高了,达到Fe_(1.70)S,我们认为这是由于火成黄铁矿和在高温下形成赤铁矿。 D和Cl的富集以及矿穴的较高氧化(如赤铁矿所示),支持了这样一种情况,即在岩石的裂缝或空隙内形成蚀变产物。这些蚀变产物的特征保留在冲击熔体(现在是玻璃)中,该熔体是在冲击冲击过程中这些裂缝和空隙塌陷时形成的。使用HEAT程序对Tissint冲击熔体袋进行的热模拟表明,具有保持水蚀变化特征的最大潜力的冲击熔体袋很小,与冲击熔体的其他区域隔离,无囊泡和玻璃状。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号