Quantification of the influences of aggregate shape and sampling method on the overestimation of ITZ thickness in cementitious materials

摘要

The microstructure of the interfacial transition zone (ITZ) surrounding the aggregate in a cementitious composite is quite different from that of the bulk matrix, because of its distinct physical nature including relatively high porosity and low rigidity. The thickness and volume fraction of the ITZ play a major role in determining the transport and mechanical behavior of cementitious composites. However, the ITZ thickness may be overestimated when undertaking sectional plane analysis of these composites. Analysis of Platonic particles has previously shown that the sphericity of the particle is an important parameter in determining the overestimation of the ITZ thickness, but this raises the question of whether sphericity is sufficient to uniquely characterize the influence of aggregate shape. This paper investigates the influence of particle shape on overestimation of ITZ thickness for aggregate shapes which have the same sphericity values as Platonic particles; specifically, spheroids of differing geometries. A normal line sampling algorithm, which is designed to replicate the practical experimental process used in ITZ determination, is employed to obtain the apparent ITZ thickness. The influences of particle shape, sampling method and particle size distribution are investigated in terms of the overestimation of the ITZ volume fraction, and the effective diffusivity within three-phase composites, using the differential effective medium approximation.