首页> 外文OA文献 >A High Frequency Geometric Focusing Transducer Based on 1-3 Piezocomposite for Intravascular Ultrasound Imaging
【2h】

A High Frequency Geometric Focusing Transducer Based on 1-3 Piezocomposite for Intravascular Ultrasound Imaging

机译:基于1-3压电复合材料的高频几何聚焦传感器,用于血管内超声成像

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Due to the small aperture of blood vessel, a considerable disadvantage to current intravascular ultrasound (IVUS) imaging transducers is that their lateral imaging resolution is much lower than their axial resolution. To solve this problem, a single-element, 50 MHz, 0.6 mm diameter IVUS transducer with a geometric focus at 3 mm was proposed in this paper. The focusing transducer was based on a geometric-shaped 1-3 piezocomposite. The impedance/phase, pulse echo, acoustic intensity field, and imaging resolution of the focusing transducer were tested. For comparison, a flat IVUS transducer with the same diameter and 1-3 piezocomposite was made and tested too. Compared with their results, the fabricated focusing transducer exhibits broad bandwidth (107.21%), high sensitivity (404 mV), high axial imaging resolution (80 μm), and lateral imaging resolution (100 μm). The experimental results demonstrated that the high frequency geometric focusing piezocomposite transducer is capable of visualizing high axial and lateral resolution structure and improving the imaging quality of related interventional ultrasound imaging.
机译:由于血管的小孔径,对当前血管内超声(IVUS)成像换能器的相当大的缺点是它们的横向成像分辨率远低于它们的轴向分辨率。为了解决这个问题,本文提出了一种单元素,50MHz,0.6毫米直径的IVUS换能器,其具有在3mm的几何焦点上的几何焦点。聚焦换能器基于几何形1-3压电复合材料。测试了阻抗/相位,脉冲回波,声学强度场和聚焦换能器的成像分辨率。为了比较,制备具有相同直径和1-3压电复合材料的扁平IVUS换能器。与它们的结果相比,制造的聚焦换能器具有宽带宽(107.21%),高灵敏度(404mV),高轴向成像(80μm)和横向成像分辨率(100μm)。实验结果表明,高频几何聚焦压电复合换能器能够可视化高轴向和横向分辨率结构并提高相关介入超声成像的成像质量。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号