首页> 外文OA文献 >Stressed-strain state of structural elements of buildings by 3D-printing technology
【2h】

Stressed-strain state of structural elements of buildings by 3D-printing technology

机译:3D印刷技术建筑物结构元素的应力 - 应变状态

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Problem statement. The results of surveys on  development in the near future indicate that Ukraine has great prospects for low-rise construction. But low-rise construction can be economically justified when the cost of the land is minimal, or construction period is reduced to the maximum. Such a solution is construction using 3D-printing. This article provides examples of 3D-printing technology application in various industries, namely in construction; features of 3D-printers and their capabilities; investigations of the stress-strain state of an external load-bearing wall fragment and a two-storey residential building, constructed with 3D-printing technology. Purpose. Development of a method for calculating building envelopes and low-rise residential buildings in general, constructed with 3D-printing technology. Methods. Research of the stress-strain state of building structures produced by means of3D-printing technology was carried out using “LIRA − CAD 2013” software package. Results. Based on the calculations of the external wall fragment and a two-storey residential building, produced by 3D-printing technology, places where maximum stresses and displacements occur were identified. it was also found out that they do not exceed boundary values. Scientific novelty. For the first time, the basic guidelines for the calculation, design and installation technology of structures of low-rise residential buildings using 3D-construction printing technology are proposed taking into account the absence of a regulatory framework for this type of work. Practical value. The studies conducted allow us to manufacture individual building structures and low-rise buildings using 3D-printing technology.
机译:问题陈述。在不久的未来发展调查的结果表明,乌克兰有低层建筑前景十分广阔。但低层建筑可能是经济合理的,当土地的成本是最小的,或建设周期减少到最大。这样的解决方案是使用三维印刷结构。本文提供了在各种工业,即在施工3D印刷技术的应用实例;三维打印机及其功能特征;外部承重壁片段的应力 - 应变状态和两层住宅楼,与3D-印刷技术构建的调查。目的。计算建筑围护结构和方法的建立低层住宅建筑一般,与3D印刷技术构建。方法。构建由装置产生结构的应力 - 应变状态的研究of3D印刷技术进行了使用“LIRA - CAD 2013”​​软件包。结果。基于外部壁片段的计算和两层住宅楼,通过三维印刷技术生产的,其中,最大应力和位移发生的地方进行了鉴定。也有人发现,他们不超过边界值。科学创新。这是第一次,为结构的计算,设计和安装技术的基本准则采用3D-建设印刷技术提出了考虑到缺乏监管框架对这类工作的低层住宅楼。实际价值。所进行的研究使我们能够制造单个建筑结构和使用3D印刷技术的低层建筑。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号