首页> 外文OA文献 >The Prediction of Smoke Detector Activation Times in a Two-Storey House Fire through CFD Modelling
【2h】

The Prediction of Smoke Detector Activation Times in a Two-Storey House Fire through CFD Modelling

机译:通过CFD建模预测两层楼火灾中烟雾探测器的激活时间

摘要

This report describes an investigation into the prediction of the activation times of domestic ionisation and photoelectric smoke detectors within a two storey dwelling, the work undertaken being an extension to that previously presented by Brammer (2002). Three fire scenarios are considered, each having been a real test fire undertaken at the Building Research Establishment in Cardington. These three fire scenarios all involved the flaming combustion of an upholstered armchair within the lounge on the Ground floor. During the experiments various results were recorded, including temperatures, optical densities and smoke detector activation times. The fire scenarios where modelled using FDS, Version 5. Base parameters regarding the fuel load where defined to be 0.05kgsoot/kgfuel and 20MJ/kg. Consideration was also given to the effect varying the effective heat of combustion and defined soot yield would have on derived smoke detector activation times. Additional simulations where thus run considering soot yields of 0.04kgsoot/kgfuel and 0.10ksoot/kgfuel, and an effective heat of combustion of 25MJ/kg. Three prediction methods where applied to the results of the FDS simulations for derivation of the activation times of smoke detectors located throughout the house. These methods where the temperature correlation method, Heskestad’s method, and Cleary’s method. The temperature correlation method considered activation criterions of 4°C, 13°C and 20°C above ambient.The Heskestad and Cleary methods were found to derive comparable activation times for each detector location. None of the prediction algorithms where however found to predict activation times consistently comparable to the test data. Rather, it was determined that for an appropriate prediction method to be adopted for accurate assessment of a given fire scenario, consideration must be given to the:•type of detector being assessed;•location of the detector relative to the fire;•mode of combustion (i.e. flaming or smouldering); and the•growth rate of the fire.
机译:该报告描述了对两层住宅中家用电离和光电烟雾探测器的激活时间预测的调查,该工作是对Brammer(2002)先前所做工作的扩展。考虑了三种火灾场景,每种场景都是在Cardington的Building Research Establishment进行的真实测试火灾。这三种火灾场景都涉及一楼休息室内的软垫扶手椅的燃烧。在实验过程中,记录了各种结果,包括温度,光密度和烟雾探测器激活时间。使用FDS版本5对火灾情景进行建模。有关燃料负载的基本参数定义为0.05kgsoot / kgfuel和20MJ / kg。还考虑了改变有效燃烧热和确定的烟yield产量对派生烟雾探测器激活时间的影响。因此,在进行其他模拟时会考虑烟灰量为0.04kgsoot / kg燃料和0.10ksoot / kg燃料,以及有效燃烧热为25MJ / kg。三种预测方法应用于FDS模拟的结果,以推导整个房屋内烟雾探测器的激活时间。这些方法包括温度关联方法,Heskestad方法和Cleary方法。温度相关法考虑了高于环境温度4°C,13°C和20°C的激活标准,发现Heskestad和Cleary方法可得出每个探测器位置的可比激活时间。但是,没有一种预测算法能够预测出与测试数据一致的激活时间。相反,已确定要采用适当的预测方法来准确评估给定火灾场景,必须考虑以下因素:•被评估探测器的类型;•探测器相对于火的位置;•探测方式燃烧(即燃烧或闷烧);和火的增长率。

著录项

  • 作者

    Saunders Julie Ann;

  • 作者单位
  • 年度 2010
  • 总页数
  • 原文格式 PDF
  • 正文语种 en
  • 中图分类
  • 入库时间 2022-08-20 20:17:16

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号