首页> 外文OA文献 >Null extinction of ceria@silica hybrid particles: Transparent polystyrene composites
【2h】

Null extinction of ceria@silica hybrid particles: Transparent polystyrene composites

机译:ceria @ silica杂化颗粒的零灭绝:透明聚苯乙烯复合材料

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Scattering of light in optical materials, particularly in composites based on transparent polymer and inorganic pigment nanoparticles, is a chronic problem. It might originate mainly from light scattering because of a refractive index mismatch between the particles and transparent polymer matrix. Thus, the intensity of light is rapidly diminished and optical transparency is reduced. Refractive index matching between the pigment core and the surrounding transparent matrix using a secondary component at the interface (shell) has recently appeared as a promising approach to alter light scattering. Here, CeO2 (ceria) nanoparticles with a diameter of 25 nm are coated with a SiO2 (silica) shell with various thicknesses in a range of 6.5-67.5 nm using the Stöber method. When the hybrid core-shell particles are dispersed into transparent polystyrene (PS), the transmission of the freestanding PS composite films increases over both the ultraviolet (UV) and visible region as the shell thickness increases particularly at 37.5 nm. The increase of transmission can be attributed to the reduction in the scattering coefficient of the hybrid particles. On the other hand, the particles in tetrahydrofuran (THF) absorb over UV and the intensity of absorption shows a systematic decrease as the shell thickness increases. Thus, the silica shell suppresses not only the scattering coefficient but also the molar absorptivity of the core ceria particles. The experimental results regarding the target shell thickness to develop low extinction (scattering + absorption) composites show a qualitative agreement with the predictions of Effective Medium Theory.
机译:在光学材料中,特别是在基于透明聚合物和无机颜料纳米粒子的复合材料中,光的散射是一个长期的问题。由于颗粒和透明聚合物基质之间的折射率不匹配,它可能主要来自光散射。因此,光的强度迅速降低并且光学透明度降低。使用界面(壳)上的次要成分,颜料核与周围的透明基质之间的折射率匹配最近成为改变光散射的一种有前途的方法。在此,使用斯托伯方法,用直径在6.5-67.5 nm范围内的各种厚度的SiO2(二氧化硅)壳覆盖直径25 nm的CeO2(二氧化铈)纳米颗粒。当将杂化的核-壳颗粒分散到透明聚苯乙烯(PS)中时,随着壳厚度的增加(尤其是在37.5 nm处),独立PS复合膜在紫外线(UV)和可见光区域的透射率都会增加。透射率的增加可以归因于杂化颗粒的散射系数的降低。另一方面,四氢呋喃(THF)中的颗粒会被紫外线吸收,并且吸收强度会随着壳厚度的增加而有系统地降低。因此,二氧化硅壳不仅抑制核心二氧化铈颗粒的散射系数,而且抑制其摩尔吸收率。关于开发低消光(散射+吸收)复合材料的目标壳厚度的实验结果与有效介质理论的预测在质量上吻合。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号