INFLOW MEASUREMENTS MADE WITH A LASER VELOCIMETER ON A HELICOPTER MODEL IN FORWARD FLIGHT. VOLUME 1: RECTANGULAR PLANFORM BLADES AT AN ADVANCE RATION OF 0.15

摘要

AN EXPERIMENTAL INVESTIGATION WAS CONDUCTED IN THE 14- BY 22-FOOT SUBSONIC TUNNEL AT NASA LANGLEY TO MEASURE THE INFLOW INTO A SCALE MODEL HELICOPTER ROTOR IN FORWARD FLIGHT (MICROINF = 0.15). THE MEASUREMENTS WERE MADE WITH A TWO COMPONENT LASER VELOCIMETER (LV) ONE CHORD ABOVE THE PLANE FORMED BY THE PATH OF THE ROTOR TIPS (TIP PATH PLANE). A CONDITIONAL SAMPLING TECHNIQUE WAS EMPLOYED TO DETERMINE THE AZIMUTHAL POSITION OF THE ROTOR AT THE TIME EACH VELOCITY MEASUREMENT WAS MADE SO THAT THE AZIMUTHAL FLUCTUATIONS IN VELOCITY COULD BE DETERMINED. MEASUREMENTS WERE MADE AT A TOTAL OF 147 SEPARATE LOCATIONS IN ORDER TO CLEARLY DEFINE THE INFLOW CHARACTER. THIS DATA IS PRESENTED WITHOUT ANALYSIS. IN ORDER TO INCREASE THE AVAILABILITY OF THE RESULTING DATA, BOTH THE MEAN AND AZIMUTHALLY DEPENDENT VALUES ARE INCLUDED AS PART OF THIS REPORT ON TWO 5.25 INCH FLOPPY DISKS IN MICROSOFT CORPORATION MS-DOS FORMAT.