Viscosity measurements at high temperature and high pressure: A novel technique

摘要

The extensive numerical modelling of transport phenomena was performed for the melt growth of mercury cadmium telluride. To increase the fidelity of modelling the kinematic viscosity of liquid Hg(1-x)Cd(x)Te was determined at various compositions in the range of x between 0 and 0.2 and at temperatures around and below the respective melting point. The phase diagram of Hg(1-x)Cd(x)Te shows that for this range the melting point varies from 670 C for pure HgTe to 790 C at x=0.2. The vapor pressure above the melt varies correspondingly from 15 to about 40 atm. Hence, the measurement of viscosities in this system requires a technique that allows for combinations of high temperatures and pressures. In addition, a closed isothermal system is required. The high pressure melt container must also be inert to molten Hg(1-x)Cd(x)Te to avoid possible errors from contamination of the liquid. A novel technique that largely circumvents the above experimental problems is described. Its theory is also presented.